Table of Contents
Advertisement
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Models S 15SA and S 18SA Disc Sanders by
all of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer
seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the
meaning of the precautions listed on the Name Plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture, and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of the Disc Sander are listed in the Handling
Instructions to enhance the safe, efficient use of the tool by the customer. Salespersons must be thoroughly
familiar with the contents of the Handling Instructions to be able to offer appropriate guidance to the customer
during sales promotion.
7-2. Cautions on Name Plate
The following basic precautions are listed on the Name Plate attached to the main body of each tool.
1) S 15SA
(1) For Taiwan
2) S 18SA
(1) For the U.S.A. and Canada
-- WARNING --
To reduce the risk of injury, the user must read and understand instruction manual.
AVERTISSEMENT
Afin de rèduire le risque de blessures, l'utilisateur doit lire et bien comprendre le
mode d'emploi.
(1) For China
CAUTION
Read thoroughly HANDLING INSTRUCTIONS before use.
7-3. Precautions on Usage
Never press the lock lever while the spindle is rotating:
If the lock lever is pressed while the spindle is rotating, the spindle will stop immediately. In such a case, there is
a danger that the wheel washer may be loosened so that the rubber pad and sanding disc fly off unexpectedly to
cause possible serious injury.
--- 7 ---
Advertisement
Table of Contents
