Cruise Control - Audi A8 Getting To Know Manual

Cruise Control

Activate
To activate, pull the control stalk toward you.
Set Cruising Speed
At your desired speed, press the
button at the end of the stalk. The set
CRUISE
speed and the illuminated
are shown in the Driver Information
Display.
Cancel/Resume
To cancel and resume cruise control:
1. Press the brake pedal or push the
stalk slightly away from you.
CRUISE
2. The light will go off.
3. To resume, pull the stalk towards
you; you will return to your set
speed.
Your most recently set speed
appears as a small icon in the Driver
Information Display. It remains in
memory until you turn your Audi off.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under cruise control.
SET
icon
Changing Speed
There are three ways to change your speed:
1. Accelerate or decelerate, then press
2. To increase/decrease speed in 1 mph
increments, or 2.5 mph increments with
adaptive cruise control, tap the stalk up
or down.
3. Hold the stalk up or down to increase/decrease
speed in 5 mph increments; release when
desired speed is reached.
Optional Adaptive Cruise Control
(ACC)
Helps maintain a safe distance between you and vehicles in front
of you, eliminating the need reset your cruise control after braking.
When you approach a slower-moving vehicle in front of you, ACC will
automatically slow down to that vehicle's speed and maintain a safe
distance. When the vehicle is no longer present, ACC will accelerate
back to the stored speed.
There are four preset distance settings that can be adjusted using
the distance switch on top of the stalk. The default is distance three
and will reset to that each time you turn on the ignition.
Please refer to your owner's manual for additional information.
Cruise Control
TEXT A8CRUISE1 to 38981
Do not text and drive. Message and data rates may apply.
SET
TEXT A8CRUISE2 to 38981
Do not text and drive. Message and data rates may apply.
27
again.
28