Jonsered LT2113 CM Spare Parts page 12

TRACTOR - - MODEL NO. LT2113CM
ENGINE 24 24
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambi-
ent operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is
due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-
engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.
(96061022405), PRODUCT NO. 960 61 02-24
KEY PART
NO. NO. DESCRIPTION
1 532 17 05-51 Control Throt/Ck
2 817 72 04-08 Screw Hex Thd Cut 1/4-20 x 1/2
3 - - - - - - - - Engine Briggs Model 219807-3402-B1
4 532 17 97-58 Muffler
13 532 16 52-91 Gasket Muffler
23 532 16 98-37 Shield Brn/Dbr Guard
25 532 19 06-95 Control Choke
29 532 13 71-80 Kit Spark Arrester (Flat Scrn)
31 532 40 75-51 Tank Fuel 2.00
32 532 43 02-20 Cap Asm Fuel
33 532 12 34-87 Clamp Hose Blk
37 532 13 70-40 Line Fuel
44 817 67 04-12 Screw Hexwsh thdrol 1/4-20 x 3/4
45 817 00 06-12 Screw Hexwsh Thdr 3/8-16 x 3/4
46 819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
72 532 19 23-34 Screw 5/16-18 x .75
78 817 06 06-20 Screw 3/8-16 x 1-1/4
81 873 51-04-00 Nut Keps Hex 1/4-20 unc
122 532 42 19-22 Extension Drain Oil
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
11