Sony DSC-W300 Service Manual page 26

5 Install the new light interception ring.
Note: Install the new light interception ring, facing its shining side down.
6 Apply the glue to the side of cam ring and install the new ornamental ring (B) while rotating it to spread the glue.
Note: Use adhesive (Super X) or an equivalent article.
Don't use what becomes white after drying like a quick-drying glue.
7 Install the old ornamental ring (B) in the reverse direction. Fix it with a rubber band and leave for 30 minutes as is.
Note: Load of about 500g.
5 New Light Interception
Ring
7 Old Ornamental
Ring (B)
New Ornamental
Ring (B)
DSC-W300_L2
Install the light interception
ring, facing its shining side down.
2-14
6 New Ornamental
7 Rubber band
Ring (B)
Apply the glue to
the side of cam ring.
Old Ornamental
Ring (B)
New Ornamental
Ring (B)