Epson G5450WUNL Installation Handbook

Epson PowerLite Pro G5450WUNL / G5550NL /
G5650WNL / G5750WUNL / G5950NL
note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve battery power.
When you release the
button, normal operation
resumes.
note
Using the remote under
bright uorescent lamps or
in direct sunlight may a ect
projector response.

Using the Remote Control

Make sure batteries are installed. Follow
these tips for using the remote control:
Point the remote control at the front of the projector or at the
screen.
Stand within 49 feet (15 meters) of the projector.
Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn o the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the di erent sources:
The easiest way to select your source is to press the
on the remote control (or the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, you can press one of the
to select the connected device you need.
After you select a source, the screen goes dark for a moment before the
image appears.
INSTALLATION HANDBOOK
Search
button on the
Source Search
Source
Remote Control Information
button
buttons
1