Advertisement
8. A beep will sound when the cooking time has finished, and the appliance switches to standby mode.
9. After cooking is completed, press the ON/OFF button again to turn off the unit.
Notice:
1. The power will completely shut off with 9 second if either (a) the wrong type of cookware is applied or (b) no
cookware is placed on the unit.
2. If the unit be used for 150 minutes under the TEMP or HEAT state, the LED display will show EE code and
sound, then turn off automatically.
3. The Max Timer is 150 minutes per operation.
CLEANING
Clean after each use. Turn Off, Disconnect plug from power source, and wait until unit has cooled down
before cleaning.
If the pots/pans are used without being cleaned, this may result in discoloration or stains.
Do not use benzene, thinner, scrubbing brush or polishing powder to clean any surface on induction cooker.
Wipe down the unit using a damp cloth
When needed, use vacuum cleaner to remove dirt from the air intake and exhaust vent. Never insert any
type of metal or iron wire into these two vents
Never run water over the unit (If water gets inside it will damage & cause unit to malfunction.)
WARNING: an authorized service representative should perform any servicing
TROUBLE SHOOTING
If LED-display shows the error code, please reference to the solution as following
Error Code
"---" and the unit sounds
"Dee, Dee, ..."
E01
E02
E03
E04
E05
E06
E07
E08
Cause and Solution
There is no cookware or no suitable cookware on the stove.
The power will completely shut off with 9 second if it is no
cookware or wrong type of cookware placed on the unit.
Voltage is under 160V
Voltage is over 270V
The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
The cooking temperature exceed
mode "POWER" to cook, the max temperature is
cooking temperature exceeds
code. Please power off to eliminate the wrong record and let
the appliance cool down. Then plug the power cord again and
restart. If you would like the cooking temperature exceed
please use the function mode "TEMP", the max temperature is
.
450℉
The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
The cooking temperature exceeds
function mode "TEMP". After the device has cooled down, the
appliance will automatically enter standby mode.
You are using unsuitable cookware. Please use the suitable
cookware (with the flat base). Power off to eliminate the wrong
record, plug in the power cord again and restart.
3
.If you use the function
300℉
300℉
, the device shows an error
300℉
while using the
450℉
.If the
,
300℉
Advertisement
