Reference Section; Troubleshooting - Toshiba 32W2300A Owner's Manual

Troubleshooting

Why is there no sound or picture?
Check that the television is on and that all
connections are made properly.
There is a picture, but why is there little or no
colour?
The colour is factory set to Auto to automatically
display the best colour system.
When using an external source, if there is little or no
colour, improvements may sometimes be achieved.
To manually change the colour system:
1. With the external source playing, select Manual
setting in the SETUP menu.
2. 8VLQJ RU WR FKRRVH IURP Auto, NTSC 4.43,
NTSC 3.58, SECAM or PAL.
Manual setting
Colour system: Auto
EXT 1 A
Select Change
Why doesn't the video/DVD being played show on-
screen?
Make sure the Media player or DVD player is
connected to the television, then select the correct
input by pressing .
Why is there a good picture but no sound?
Check all cable connections and that the volume has
not been turned down or that the sound has not been
muted.
What else can cause a poor picture?
Interference or a weak signal. Try a different
television station. Manual fine tuning may help:
1. Select the ATV Manual Tuning in the SETUP
menu.
Highlight the station and press
RU WR VHOHFW Manual fine tuning.
ATV Manual Tuning
1 DK A C 69
Select Change
2. 8VLQJ RU WR DGMXVW WR JHW WKH EHVW SLFWXUH
and sound. Press
50

Reference section

Reference section
Save Back
OK RETURN
 WKHQ SUHVV
Position
0 − − − − −
Save Back
OK RETURN
and then RETURN.
Why doesn't the remote control work?
Check that the batteries aren't exhausted or inserted
incorrectly.
Why are there problems with text?
Good performance of text depends on a strong
broadcast signal. If the text is unreadable or garbled,
check the aerial, satellite or cable connection. Go to
the main index page of the text service and look for
the User Guide. This will explain the basic operation
of text in some detail.
Why are the four coloured text numbers visible but
no text (Analogue Only)?
Text has been selected while viewing an external
source. No text will appear on-screen or a box may
appear stating no information is available. Select a
broadcasting channel and press
What can be done if the user-defined password has
been forgotten?
Use the universal password 1276, then change to a
new number of your choice.
Why don't the devices connected via HDMI operate
properly?
Make sure to use cables with the HDMI logo
®
( ). Some early HDMI equipment may not
work properly with the latest HDMI TV products, due
to adoption of new standards.
Why is the Media Player/DVD picture in black and
white?
Check the correct input has been chosen: S-VIDEO
or AV.
Why did TV turn off by itself?
After roughly 15 minutes without any input video
signal at TV mode, the TV will turn off to reduce
power.
to access.