3. horizontally, with a slight outwards slant. 8. Follow the electrical diagram applying to the EBB version that is being installed (fig. 5 to 8). INSTALLATION 9. Close the connections cover (5) with the IMPORTANT: Before proceeding with the screw.
Page 6
1 and 30 minutes. 11.Switch the extractor on to check that it is When in the timer mode the EBB works at slow working properly. speed. ELECTRICAL CONNECTION (fig. 5 to 8)
switched off), the device continues to operate at slow speed for the length of time set by the timer. ATTENTION: When the relative humidity level in the area is above the set value, automatic operation prevails over manual operation; that is, the device cannot be turned off by means of the switch.