Using Your Vacuum Cleaner - Cascade SL-235 Instruction Manual

Using your Vacuum Cleaner

1. Before use, please ensure the electrical voltage and frequency of
the circuit corresponds to those indicated on the appliance.
2. Pull the power cable from the vacuum cleaner and insert it into the
power plug. The 'yellow' marker on the power cable indicates the
ideal cable length. The 'red' marker indicates the maximum power
cable length. WARNING: Do not extend the cable beyond the red
marker.
3. Switch the power point on.
4. Press the "ON/OFF" button to turn the vacuum cleaner on. It is
advisable to set the 'Suction power dial' to minimum before switch-
ing the appliance on.
5. Adjust the 'Suction power dial' to the desired level for vacuuming.
6. Use the different cleaning attachments to suit the surface to be
cleaned.