LG 60PC1D Service Manual page 8

8. EDID(The Extended Display
Identification Data)/DDC
(Display Data Channel) Download
This is the function that enables "Plug and Play".
8-1. Required Test Equipment
(1) PC, Jig for adjusting DDC.
(PC serial to D-sub Connection equipment)
(2) DVI to HDMI Connector.
Analog EDID
D-sub to D-sub
8-2. Setting of Device
PC
8-3. EDID DATA
(1) HDMI EDID DATA.
(2) RGB EDID DATA.
HDMI EDID
DVI-D to HDMI
PDP
SET
JIG
8-4. Act or set the EDID S/W
1) As above Fig. 6, Connect the Set, EDID Download Jig, PC
& Cable.
2) Turn on the PC & EDID Download Jig. And Execute the
S/W : EDID TESTER Ver,2.5.
3) Set up S/W option.
Repeat Number : 3
Device Address : A0
PageByte : 8
8-5. How to use the EDID S/W
1) Init the data.
2) Load the EDID data.(Open File)
Model
60PC1D-AA
3) Press the "Write Data & Verify"button. and input the
data.
4) If the writing is finished, you will see the "OK" message.
Checksum RGB
(Analog)
67
HDMI
(Digital)
3724