Applied Energy Products SLT Installation And User Manual

Selectronic thermostatic mixer shower

Advertisement

Quick Links

GUARANTEE AND CONTACT DETAILS

GUARANTEE

Terms and Conditions for UK (outside UK contact your local distributor)
We, Applied Energy Products Limited, guarantee this product for domestic use only, for the period of 24
months from the date of purchase.
Within the guarantee period we will resolve, free of charge, any manufacturing defects in the product resulting
from faulty workmanship or material on condition that:-
a) The appliance has been correctly installed in accordance with our instructions and is being used on the
supply circuit or voltage printed on the rating plate.
b) The appliance has been used in accordance with these instructions and has not been tampered with or
otherwise subject to misuse, neglect or accident.
c) The appliance has not been taken apart, modified or repaired except by a person authorised by us.
d) Evidence of the date of purchase in the form of an invoice or receipt will be required in order to qualify for
an in-guarantee repair.
e) For the service work to be undertaken free of charge, the work must be only undertaken by
Applied Energy Products Limited, or our approved agents.
f) Service under guarantee has no effect on the expiry date. The guarantee on any exchanged parts or product
ends when the original guarantee period ends.

EXCLUSIONS

This guarantee DOES NOT cover damage or defects arising from poor or incorrect installation, improper use or lack of
maintenance, including build-up of limescale. It is the responsibility of the installer to check that the installation parameters
meet the requirements of the product, and any relevant regulations.
If we are called out to a fault, which is subsequently identified as being an installation fault, we will make a charge. It is
important that the routine checks are completed before calling us out, as many issues can be simply diagnosed and
resolved.
We make no guarantees as to response times for repairs. We will endeavour to achieve the most timely response possible
but while we indicate an average response time, this should not be taken as a guarantee.
The guarantee applies to a repair or replacement (at our discretion) of the product subject to the conditions above, and
DOES NOT cover compensation for the loss of the product or consequential loss of any kind.
The guarantee does not apply to sprayheads, hoses, in line filters and accessories.
This guarantee does not affect your statutory rights.
Full details of terms and conditions are available on request from: -
APPLIED ENERGY PRODUCTS LIMITED
MORLEY WAY, PETERBOROUGH PE2 9JJ
TEL: +44 (0) 844 372 7761
FAX: +44 (0) 844 372 7762
Website: www.applied-energy.com
Page 8 of 8
.
(A4 Leaflet 555-2277-05b)
SLT1 - SELECTRONIC THERMOSTATIC MIXER SHOWER
Installation and User Guide
IMPORTANT
This booklet should be left with the user after
installation and demonstration
Page 1 of 8
*
*
GB Patent 2430152

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLT and is the answer not in the manual?

Questions and answers

Summary of Contents for Applied Energy Products SLT

  • Page 1 SLT1 - SELECTRONIC THERMOSTATIC MIXER SHOWER Terms and Conditions for UK (outside UK contact your local distributor) We, Applied Energy Products Limited, guarantee this product for domestic use only, for the period of 24 months from the date of purchase.
  • Page 2 System Requirements AFTER SALES SERVICE The SLT1 Selectronic Shower assembly can be used on systems with pressures from 0.2 bar (2 m head) to 10 bar. The maximum hot to cold pressure differential should not exceed We offer a technical advisory service on the telephone to installers and other customers with 2 bar at higher pressures or 0.2 bar at very low pressures.
  • Page 3 Installation Summary Figure 3 PLUMBING DIAGRAM FOR GRAVITY FED INSTALLATIONS (Installation must be carried out by a competent qualified IPHE or CORGI registered plumber. Please also read the detailed instructions overleaf) . The SLT1 Selectronic Thermostatic Mixer Shower Assembly can be fitted and plumbed into a shower room in a fraction of the time normally taken to install a conventional mixer shower.
  • Page 4 Offer up the SLT1 Selectronic Shower assembly ensuring that the inlet pipe end caps are in NOTE : Backflow prevention position in order to stop debris entering the inlet pipes. Push the pipe ends and main tube through th e ceiling hole whilst locating the bracket tube over The SLT1 Selectronic thermostatic mixer shower incorporates a non return valve in the the upper bracket.

Table of Contents