Table of Contents
Advertisement
Adhesive Mount (VCT-AM1)
The Adhesive Mount is used for fixing the Waterproof Case to an item you intend to use. The
Adhesive Mount is a general term for the Attachment Buckle, Flat Adhesive Mount, and Curved
Adhesive Mount. Insert the camera in the Waterproof Case before attaching.
Attachment Buckle
Tripod
Positioning pin
screw
Attachment method
1 Align the tripod screw hole in the bottom of
the Waterproof Case with the tripod screw
hole of the Attachment Buckle, and fix firmly
with the tripod screw.
• Confirm that the assembly is fixed securely.
2 Attach the Attachment Buckle (with the
Waterproof Case set in step 1) to the Flat
Adhesive Mount or Curved Adhesive Mount by
sliding it until it clicks into place.
3 In an environment at room temperature (20°C
(68°F) or above), completely remove dust,
moisture and oily substances from the surface where the Adhesive Mount
is to be attached.
4 Peel off the release paper on the back, and fix the Adhesive Mount in the
desired location.
• Adhesive power reaches its maximum strength 24 hours after the Adhesive Mount is attached to the
desired location.
z
To attach to or detach from the Attachment Buckle
Press and hold the circled part to unlock, then slide it
in the opposite direction of step 2.
Flat Adhesive Mount
Curved Adhesive Mount
Continued r
37
GB
Hide quick links:
Advertisement
Table of Contents
