Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for US Blaster USB 4022
-
Page 2: Table Of Contents
6.1 Connecting a DVD player ..............8 6.2 Connecting a receiver................8 6.3 Using as a subwoofer ................9 6.4 Connecting a computer ................. 9 7. Operation....................10 8. Solving problems ..................11 9. Technical specifications................12 US Blaster Black Reference Series User Guide... -
Page 3: Foreword
1. Foreword Congratulations with the purchase of your US Blaster USB 4022 Home Cinema set. You now have high-quality sound equipment. The set consists of a center unit with a low tone speaker and amplifiers for all speakers, four satellite speakers and center speaker. -
Page 4: Safety Instructions
Do not use any cleaning products to clean your USB 4022. Use a dry cloth. 4. Moisture and sunlight Do not use the USB 4022 in a humid environment, and put it in a place where there is no direct sunlight. 5. Setting up and ventilation Put the USB 4022 on a stable base. -
Page 5: Rear Panel Connections
7 ..Mains power level selector switch. Set this to 220-240V; 8 ..Fuse holder / input for mains power cable; connect the power cable to an earthed plug socket. To replace the fuse, see chapter: Solving problems. US Blaster Black Reference Series User Guide... -
Page 6: Setting Up The Speakers
Low tones travel more easily than high tones in sound. The positioning of the low tone speaker is therefore not so relevant. In the case of the USB 4022 the center unit does not actually only function as a bass speaker. The center unit also accommodates the amplifiers and has an infrared sensor for the remote control. -
Page 7: Rear Speakers
You will find one + and one – on the connecting sockets of the speakers and of the center unit. Thirty metres of speaker cable is supplied with your USB 4022. It is a twin-vein cable; one of the veins is marked. -
Page 8: Connecting A Dvd Player
6.1 Connecting a DVD player You can connect the line outputs from your DVD player directly to the USB 4022 inputs. You can use the supplied stereo cinch cables for this. This means you can make optimal use of the audio decoders for DTS, Dolby Digital and Dolby Surround built in to the DVD player. -
Page 9: Using As A Subwoofer
(Sub Pre-Out) to the Aux input on the center unit (NOT the Sub input!). We recommend that you use a good quality connecting cable between the receiver and the center unit of the USB 4022. Special cables are for sale in the shops for this (Interlinks). -
Page 10: Operation
9 ..You can adjust the volume of one of the selected channels on your Black Label Reference Series with the Volume buttons. The LED will light up depending on which function you have selected...You can also use these buttons to change the sound settings without the remote control. US Blaster Black Reference Series User Guide... -
Page 11: Solving Problems
If the USB 4022 is still not working, please contact your supplier! The Power LED is not lit If the USB 4022 is connected to the mains power supply, the switches are on and the Power LED is not lit, check the fuse. -
Page 12: Technical Specifications
Dimensions (H x B x D) Center unit....................380 x 275 x 420 mm Center......................246 x 90 x 84 mm Front/Surround ................... 120 x 90 x 104 mm Power consumption ................. Weight......................US Blaster Black Reference Series User Guide...
Need help?
Do you have a question about the USB 4022 and is the answer not in the manual?
Questions and answers