AIR VENTED TUMBLE DRYER INSTRUCTIONS FOR USE IMPORTANT PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS APPLIANCE. KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE.
INSTALLATION Position the tumble dryer so that the plug remains accessible after installation. Do not block the vent at the front or base of the dryer, as this will impair the working of the machine. This appliance must not be installed behind a lockable door, a sliding door or a door with hinges on the opposite side to that of the tumble dryer.
THE CONTROLS Heat push button, press to select appropriate heat setting (some programs have limited choice of heat setting). High is used for drying cottons and linens; half heat is used for drying synthetics and delicates; cool does not apply any heat “-”...
P9 – Variable Time program – can be set from 10 min. to 180 min. drying time and can be operated on the full heat, half heat or cool setting. To return from a time program to the main menu, press the Reset button.
If P9 (variable time program) has been selected press the coloured Start button. A default of 120 minutes will appear in the display window. Use the (-) or (+) buttons to adjust the drying time for your laundry from 10 minutes up to 180 minutes. Holding the button down will rapidly change the time selected. Select anti-crease function if required.
Failure to heat may indicate the safety cut-out has operated. To reset, simply press the red button at the rear of the machine. If it has operated then a sharp “click” will be heard. This cut-out only operates if the airflow is severely restricted so make sure the filter is clean, the air inlets and outlets at the front and back are not blocked, and that all other restrictions are removed before re-starting.
- Under no circumstances should anything other than the recommended articles be placed in the tumble dryer. - The dryer should be serviced by an appointed service organisation and only genuine parts used. - It is dangerous to alter or modify the product in any way other than fitting authorized accessories. - We recommend that the appliance is unplugged each time after use.
Page 8
Manufactured by Crosslee plc. Hipperholme, Halifax, West Yorkshire HX3 8DE 4213 194 03231...
Need help?
Do you have a question about the 86A and is the answer not in the manual?
Questions and answers