3 . tighten each bolt (in an alternating fashion) in the upper fork clamp to the specified manufacturer’s torque . thank you for choosing the foX racing shoX mX-c (moto-X cartridge) for your motorcycle . in doing so, you have chosen 4 .
lOCaTION aND fuNCTION Of The aDJusTers The rebOuND aDJusTer was ON TOp Of yOur sTOCk fOrk buT The COMpressION aDJusTer was ON The bOTTOM Of yOur sTOCk has NOw beeN MOveD TO The bOTTOM Of The fOrk leg . fOrk buT has NOw beeN MOveD TO The TOp Of The fOrk leg . cOmpressiOn damping rebOund damping the blue compression adjuster knob is located on the top of the fork at the triple clamps and controls how...
TuNINg The MX-C dial in rebOund FirsT find a table-top jump that you can hit consistently and safely, landing as flat as possible . prIOr TO MakINg aNy fINe TuNINg aDJusTMeNTs TO yOur fOrk, as a general rule you want as little rebound damping as possible so that the suspension returns quickly, but still be sure TO CheCk frONT aND rear TIre pressures .
The MX-C RequIeRs speCIAl equIpMeNT TO ACCess ANd AlTeR The INTeRNAl pARTs OF YOuR CARTRIdge. dO NOT TRY TO OpeN YOuR FORK. FOR TeChNICAl suppORT CONTACT A FOX RACINg shOX CeRTIFIed TeChNICIAN. mx-c Owner’s manual | p/n: 605-00-093 reV a...
Page 8
Distributor. > Mark the ra number and return address clearly on the outside of the package and send to FOX racing shox (see Contact info above) or your international service Center with shipping charges pre-paid by the sender.
Need help?
Do you have a question about the MINI-MOTO MX-C and is the answer not in the manual?
Questions and answers