Start Switch; Tilt Switch - GE GCG1500BB Technical Service Manual

Start Switch

Note: Disconnect power to the compactor before
accessing the start switch.
The start switch is located in the front of the
compactor on the lower right side. The start switch
is secured in the front cover with locking tabs
located on the top and bottom of the switch. It is
necessary to use a small flat blade screwdriver to
press and release the locking tabs.
Start Switch
The switch can then be pulled out and the 2 wire
leads disconnected.

Tilt Switch

Note: Disconnect power to the compactor before
accessing the tilt switch.
The tilt switch is located in the front of the
compactor above the drawer opening. The tilt
switch is secured in the front cover with a locking
tab located on the right side of the switch. It is
necessary to use a small flat blade screwdriver to
press and release the locking tab.
Tilt Switch
The switch can then be pulled out and the 2 wire
leads disconnected.
– 15 –