Electrolux EWF 10470W User Manual page 6

6 electrolux
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Temperature
This button allows you to increase or de-
crease the washing temperature. At the po-
sition , the machine will perform a washing
cycle with cold water.
Spin Reduction
By pressing this button you can change the
spin speed of the selected programme or to
select Rinse Hold or Night Cycle option.
Night Cycle
By selecting this function the machine will not
drain the water of the last rinse and all spin-
ning phases will be suppressed, so as not to
wrinkle the laundry. This washing cycle is
very quiet and it can be selected at night or
in times with a more economical power rate.
On some programmes the rinses will be per-
formed with more water. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will
be necessary to empty out the water. To
empty out the water, please read the para-
graph «At the end of the programme».
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In
Extra Rinse
Delay Start
this way ironing is easier. Furthermore the
machine will perform some additional rinses
in some programmes. On cotton pro-
grammes the maximum spin speed is re-
duced automatically.
Extra Rinse
This appliance is designed to save energy. If
it necessary to rinse the laundry using an ex-
tra quantity of water (extra rinse), select this
option. Some additional rinses will be per-
formed. This option is recommended for
people who are allergic to detergents, and in
areas where the water is very soft.
Delay Start
The programme can be delayed from 30 min
- 60 min - 90 min, 2 hours and then by 1 hour
up to a maximum of 20 hours by means of
this button.
Start Pause
This button allows you to start or to interrupt
the selected programme.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
machine in working or has stopped with
water left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light flashing: the door is opening
Door locked
Time Manager