Opus 500 system User Manual

Opus 500 system User Manual

Opus 500 system user guide

Advertisement

Opus System
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Opus 500 system

  • Page 1 Opus System User Guide...
  • Page 2 Eine deutsche Version der Bedienungsanleitung ist verfügbar unter: La versión en español de este manual está disponible en: La versione in lingua italiana di questo manuale è disponibile sul sito: Een nederlandse versie van deze gebruiksaanwijzing is beschikbaar via: www.opus.eu/manuals...
  • Page 3: Table Of Contents

    Contents Important safety instructions..................Overview WCU500 Wall Control Unit..................WCU300 Wall Control Unit..................LRC500 Learning Remote Control................SRC500 System Remote Control................MCU500 Master Control Unit..................WCU500 General button and specific source functions............Display breakdown and button index................Main menu functions....................Source naming......................
  • Page 4: Important Safety Instructions

    Approvals The Opus Multiroom System conforms to ANSI/UL 60065 7th Edition 2003, FCC part 15, is certified to CAN/CSA C22.2 No 60065-03 and is approved by ETL for sale in the USA and Canada when used and installed according to this instruction manual.
  • Page 5 Attachments Object and Liquid Entry - Do not use attachments which are not recommended by Opus Technologies as they may - Never push objects of any kind into this product through openings as they may cause hazards.
  • Page 6: Wcu500 Wall Control Unit

    Opus 500 system component overview WCU500 MCU500 WCU300 Wall Control Unit Master Control Unit Wall Control Unit Main zone keypad with LCD display, used to select Central control unit, which connects to your audio Sub-zone keypad, used to extend a main zone and control sources connected to the MCU.
  • Page 7: General Button And Specific Source Functions

    WCU500 general button and specific source functions Source selection Mute Press to activate the Press to mute the audio desired source. Use output. Source and Source to scroll through sources. Operation The sources selected will Use these buttons to depend on your control the source installation.
  • Page 8: Display Breakdown And Button Index

    STBY SOURCE Source down. Zone shutdown. Press and hold for three Play/Pause. seconds to shutdown all Opus zones. LOCAL Selects local source, where installed (typically a TV or FAV-1 Selects pre-set radio station, CD etc. Press twice to go video located in the same room as the keypad).
  • Page 9: Main Menu Functions

    WCU500 main menu functions To activate special Opus functions or adjust the sound in your zone press the MENU button Pressing the Menu button returns to the Tuner etc. Press the Menu button to skip to the next option Bass...
  • Page 10: Keypad Functions

    WCU300 keypad f unctions Volume down Volume up Use this button to decrease Use this button to increase the volume in your sub zone the volume in your sub (also used to control zone (also used to control Bass/Treble/Balance when Bass/Treble/Balance when Select button has changed Select button has changed...
  • Page 11: Operational Buttons

    Tuner buttons Power switch Tunes tuner/preset buttons Note: In normal operation you do not (used for setup only). need to power off the Opus system with POWER CLONING PORT ZONE ACTIVE this switch. Simply use the Standby buttons on each keypad.
  • Page 12: Lcd Display

    LRC500 programming MCU500 LCD display Current pre-set FM stereo Current source display IMPORTANT! from bank This MCU500 should only be programmed using LRC500 V2.5 (or higher). Earlier versions of LRC500 are not compatible and must not be used. Installing IR codes for your new source First teach the LRC500 learning remote control the IR commands for your new source.
  • Page 13: Limited Warranty

    To obtain warranty service, please contact the Opus Technologies authorised dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your Opus Technologies product, it can be returned by your dealer to Opus Technologies or an authorised Opus Technologies service agent.
  • Page 14 This guide is designed to make using the Opus System as easy as possible. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.

This manual is also suitable for:

Wcu500Wcu300Lrc500Src500Mcu500

Table of Contents