Club Car DS Golf Cars Gasoline and Electric Owner's Manual page 18

TOW/RUN SWITCH
IQ System Electric Vehicles Only
∆
WARNING
• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.
Failure to heed this warning could result in a battery explosion or severe personal injury.
• When the Tow/Run switch is in the TOW position, all motor braking functions, including zero
speed detect, are disabled.
IQ System vehicles are equipped with a Tow/Run switch, located under the seat just above the Forward/
Reverse switch (Figure 10). The switch must be in the RUN position in order to operate the vehicle. When the
switch is in the TOW position, power to the vehicle electrical components is turned off and the vehicle will not
operate. See following NOTE.
NOTE: After placing the Tow/Run switch in the TOW position, allow 10 seconds to elapse before switching
back to the RUN position.
After placing the Tow/Run switch in the RUN position, allow 10 seconds to elapse before operating
the vehicle.
The Tow/Run switch should be placed in the TOW position under the following conditions:
• Before Towing the Vehicle: Place the Tow/Run switch in the TOW position to disable all motor braking
functions, thus preventing possible damage that could occur to the vehicle or electrical components if
the vehicle is towed while the zero speed detect motor braking function is operating.
• Before Disconnecting or Connecting Battery Cables: Place the Tow/Run switch in the TOW position
to turn off power to the vehicle electrical system, thus preventing severe arcing and possible battery
explosion as the battery cables are disconnected.
• For Long Term Storage: Place the Tow/Run switch in the TOW position to turn off power to the vehicle
electrical system, thus preventing vehicle electrical components from discharging the batteries.
Figure 10 Tow/Run Switch
Page 16 2005 DS Golf Car Owner's Manual
Controls and Indicators