Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for D-MAX DVR
Summary of Contents for D-MAX DVR
- Page 1 Installation Guide for DVR VER : 1.0...
- Page 2 How to Install DVR HDD 1 • Open up the top cover Loosen 2 screws on side and 4 • screws in the rear of DVR. 2 Hard Disks can be installed as • a basic setting. If you like to install a basic setting.
- Page 3 How to Install DVR HDD 2 • In the HDD bracket Fix HDD with 4 screws and put in the DVR. Fix HDD bracket in DVR body • with 4 screws. • Place the SATA PORT side of HDD facing Main PCB and be careful not...
- Page 4 How to Install DVR HDD 3 • When there is no HDD installed or if it is not properly installed, An Icon in the picture will be created. • In case “NO-HDD” icon appears even if the HDD is actually installed, please be sure to check out SATA/Power cable connection.
-
Page 5: Connecting Video Cable
• LOOP OUT: Same video can be output and it can be connected to monitors or other equipment. • If you have problem with BNC Connector when connecting video cable, DVR video output should be checked because it can have problem. - Page 6 Connecting Video Cable 12 • MON1 / MON2: Same video output (MON2 is LOOP OUT of MON1) • S-VIDEO Output is same as MON1, 2 and VGA output is also same. • SPOT OUT: It is like Auto Selecting function that Input videos can be switched according to time which has previously set.
- Page 7 Connecting DVR AUDIO • Up to 16 Audio(16CH) can be input. •DVR-0800S = 8 AUDIO INPUT DVR-0400S = 4 AUDIO INPUT • 2 AUDIO OUT PUT • 2 AUDIO OUT PUT • Press “FUNC” and then “MENU” key to pop up “AUDIO SELECT”...
- Page 8 •DCK-500A can exclusively control •DCK-500A can exclusively control all functions of D-max DVRs. Speed dome can be connected and controlled from both DVR and DCK- 500A. • With only one DCK-500A, up to 64 DVRs can be controlled and they can be used big-sized installation site.
- Page 9 • When you want to control cameras(speed domes) through cameras(speed domes) through DVRs, be sure to make right DVRs, be sure to make right “Address, Protocol and Baud Rate” of DVR or Camera(speed domes). Study respective manuals for details.
- Page 10 DVR Mode: used when DCK-500A, DVR and Cameras are connected. • Press “SET” key to save and get out of the menu. Relevant(converted) camera numbers will show if it is ‘DVR Mode’ or ‘Direct Mode’ in red. • Please study DCK-500A manual for detailed setup.
- Page 11 Once the setup is done DVR ID • will appear on the LCD of the front. • Make sure each DVR ID is not duplicated. If DVR ID is repeated malfunction may occur.. • Please refer to DVR manuals for...
- Page 12 Connection from DVR to Keyboard to Speed Dome 4 • Select DVR you hope to control. • When selecting DVR, set it to DVR mode first and press DVR ID No. (By pressing “DVR” button at the bottom of the keyboard you can enter either “DVR”...
- Page 13 DCK-500A in parralal connection. • Up to 14 units of DCK-500A can be used as sub(slave) keyboard. be used as sub(slave) keyboard. • Camera data is individually connected to each DVR and maximum 1024(16CH x 64pcs) cameras can be connected and controlled.
Need help?
Do you have a question about the DVR and is the answer not in the manual?
Questions and answers