Advertisement
6
40
www.jabsco.com
Spreader & Deck Mount Floodlights
The new Jabsco floodlights feature an
exclusive Dual Latch Bracket System
which allows installation directly to
rails and towers up to 2" (50mm) in
diameter without the need for
mounting tabs. Also mount easily to
flat surfaces like cabin tops and to
tower/spreader mounting tabs when
retrofitting.
I
Sealed beam "flood" provides a very even
beam pattern with no hot spots
I
Clean edge cut-offs prevent stray lighting
I
12 volt, 50 watt tungsten halogen bulb with
450 hour average life
I
Integral wire splicing for easy installation and
weatherproof wire connections
I
Tough, white U.V. stable housing will not
"yellow"
Xenon Floodlights
Bracket mounted xenon floodlights
that deliver 4 times the light output
of halogen floodlights and last up to
5 times longer. Typically used for
deck lighting, emergency lighting,
launching and docking, and
commercial fishing boat applications.
I
Compact size.
I
5000 hour life.
I
4 times brighter than halogen.
Deck Floodlights - Ultra Bright Model
A range of compact, purpose designed
floodlights for deck, cockpit or boarding
point on leisure, commercial, fishing and
safety craft available in two sizes.
I
Special trapazoidal beam pattern, designed
to be mounted above one end of horizontal
area to be illuminated, spreads light evenly
over the surface.
I
Sharp cut off enables accurate selection of
area to be illuminated minimizing stray light.
I
Blue Bulb technology improves visibility in
low light conditions.
I
Sealed beam tungsten halogen bulb, with
450 hour average life.
I
Choice of white or black tough polypropylene
housing.
I
Stainless steel universal mounting bracket.
Size:
4" long x 6" wide, (15.5cm x 10cm).
Weight: 1.4lb (0.7kg).
3"x 5" Bracket Mount
Size:
5" high x 7" wide x 4" deep
(127mm x 178mm x 102mm)
Weight: 1.5 lb (.7 kg)
4"x6" Bracket Mount
Size:
6" high x 7
5
/
" wide x 5
3
/
" deep
8
4
(152mm x 195mm x 146mm)
Weight: 2.0 lb (.9 kg)
45910-2012
3" x 5" 12 Volt dc white,
fuse 5 amp
1000150-01K
Replacement 3" x 5" 12 volt
sealed beam
45920-2012
4" x 6" 12 Volt dc white,
fuse 6 amp
1000150-03K
Replacement 4" x 6" 12 volt
sealed beam
I
Completely sealed from moisture and dirt.
I
Direct replacement for most add-on
incandescent and halogen lamps.
I
Isolation mounted to withstand vibration.
Size:
7" high x 5" wide x 6" long
(17cm x 13cm x 15cm).
Weight: 3.5lb (1.6 kg).
63142-0012
12 Volt dc HID (xenon).
63142-0024
24 Volt dc HID (xenon).
45900-4000
12 Volt dc Ultra Bright white,
fuse 6 amp.
45900-5000
12 Volt dc Ultra Bright black,
fuse 6 amp.
45900-0000
12 Volt dc white, fuse 6 amp.
45900-2000
12 Volt dc black, fuse 6 amp.
45900-0001
24 Volt dc white, fuse 3 amp.
45903-4000
Replacement sealed beam,
12 Volt dc, 65 watt.
45903-0000
Replacement sealed beam,
12 Volt dc, 30 watt.
45903-0001
Replacement sealed beam,
24 Volt dc, 60 watt.
Size:
3" long x 5" wide, (13cm x 8cm).
Weight: 1lb (0.5kg).
45900-1000
12 Volt dc white, fuse 6 amp.
45900-3000
12 Volt dc black, fuse 6 amp.
45903-0002
Replacement sealed beam,
12 Volt dc.
Advertisement
