Hitachi CP-X8170 User Manual page 62

SCREEN menu
Item
MyScreen
(continued on next page)
62
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
(1) Selecting this item displays a dialog
titled "MyScreen". It will ask you if
you start capturing an image from
the current screen.
Please wait for the target image to be displayed, and press
the ENTER or INPUT button when the image is displayed. The
image will freeze and the frame for capturing will appear.
To stop performing, press the RESET button on the remote
control.
(2) Using the ▲/▼/◄/► buttons adjusts
the frame position.
Please move the frame to the position
of the image which you want to use. The
frame may not be able to be moved for
some input signals.
To start registration, press the ENTER
or INPUT button on the remote control.
To restore the screen and return to the previous dialog, press the
RESET button on the remote control.
Registration may take several minutes.
When the registration is completed, the registered screen and
the following message is displayed for several seconds:
"MyScreen registration is finished."
If the registration failed, the following message is displayed:
"A capturing error has occurred. Please try again."
• This function cannot be selected when the ON is selected to the
MyScreen Lock item (63).
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in SECURITY menu (92).
• This function is unavailable for a signal from the LAN, USB TYPE
A / B or HDMI 1 / 2 port.
Description