Summary of Contents for Alpha Power TST200 series
- Page 1 TST200 User’s Manual TST200 series Static Transfer Switch USER MANUAL Version 1.0 Date: Nov 2009 1 / 11...
- Page 2 TST200 User’s Manual Alpha Power is a dedicated designer and manufacturer of sophisticated and environmentally rugged power electronics equipment for various markets: telecom, utility, automotive, railway and solar etc. We are offering a wide range of power conversion product from standalone inverter, N+1 redundant inverter, UPS to battery charger, inverter charger combination and solar charge controller.
- Page 3 TST200 User’s Manual Thanks for choosing our products and this manual were suitable for TST200 series static transfer switch. This chapter contains important safety and operation instructions. Read and keep this User Guide well for later reference. The TST200 needs to be installed by professionals and please pay attention to the following points prior to installation: 1>...
- Page 4 TST200 User’s Manual only qualified and As dangerous voltages and high temperature exist within the TST200 authorized maintenance personnel are permitted to open and repair it. This manual contains information concerning the installation and operation of the TST200. All relevant parts of the manual should be read prior to commencing the installation. Please follow the local stipulation meantime.
- Page 5 TST200 User’s Manual The TST200 Static Transfer Switch is a hot pluggable single-phase transfer device, providing automatic switching between two independent AC power sources. It could achieve very fast switch without interrupting power and it is suitable for important IT equipment which can not afford power disruption and ATS can not satisfy.
- Page 6 TST200 User’s Manual Model TST220 TST232 rated Amps Dimension 19"2U (87x483x259mm -- HxWxD) Weight 6kgs Input voltage 220±15% Output voltage 220±15% Input rated frequency 50Hz/60Hz Overload Capability 150% <4ms - synchronization transfer time <10ms - non-synchronization Efficiency >99% Transfer mode Break before make Peak factor Operation Temp...
- Page 7 TST200 User’s Manual Color Status Green indicate input 1 and input 2 are in synchronization Green input 1 normal Input 1 input 1 fault Output 1 Green output using input 1 Green Output normal Output Output fault Switch switching between input 1 and input 2 under MANUAL Condition choose working mode.
- Page 8 TST200 User’s Manual Description Left 1 Overload Left 2 CH1 fault contact Left 3 Synchronization fault Left 4 Input 2 fault Circuit breaker Input 1 circuit breaker Input 1 – L Connector Input 1 – N Connector Connector Earth Input 2 – L Connector Input 2 –...
- Page 9 TST200 User’s Manual The unit is packed with following materials: Ø Equipment: the 19”2U cabinet and STS module are packed separately Ø User’s manual Ø Please confirm the series number on the each module and subrack is same to that on outer carton.
- Page 10 TST200 User’s Manual The equipment has two parts one is a 19”2U cabinet and a STS module. Put the shelf on the right location of 19inch rack (Caution: Additional support must be added as bottom！). Try to push the unit from the front and side to see it moves; and repeat the above action until it is firmly secured..
- Page 11 Notice: Ø For same fault, system won’t deliver audio alarm if it was turn off in previous time. Ø For different fault, system will still deliver audio alarm. Alpha Power Systems Unit 3, 30 Heathcote Rd Moorebank NSW 2170 Ph: 02-9602 8331 www.alphapower.com.au...
Need help?
Do you have a question about the TST200 series and is the answer not in the manual?
Questions and answers