6. Playing music ......................11 7. LED indicator ......................13 8. Indication tone ......................14 Care and maintenance ................14 FAQs ....................... 15 Specifications ..................17 Warranty ....................18 Online Support / Contact Us ..............19 Kinivo BTH360-S Bluetooth Stereo Headset...
About BTH360-S The BTH360-S offers the convenience of bluetooth connectivity and a rechargeable battery without the hassle of wires. Overview (Before Use) Fig. 1 1) Status indicator light 5) Built-in microphone 2) Charging jack 6) Volume up/ next song 3) Right speaker...
Red LED status indicator light blinking twice in a row. Charge the headphones using the USB cable The charging ports on BTH360-S are designed to prevent water / sweat from entering the headphones. Please use the included cable to charge the headphones from any USB charger.
3. It will take about two hours to charge the headset fully. Warning The internal battery is recyclable. Please contact your local electronics recycling program for disposing the headphones in a safe and environment friendly way. Kinivo BTH360-S Bluetooth Stereo Headset...
Indicator light Make sure the headset is turned off. Press Enter multifunction button (MFB) for about 6-7 Blue and red lights pairing seconds. Release MFB when blue and red blink alternately. mode lights blink alternately. Kinivo BTH360-S Bluetooth Stereo Headset...
Page 7
When prompted by your cell phone to enter password or PIN, enter “0000” and press the “Yes” or “Confirm” button to confirm. After pairing successfully, choose “Kinivo BTH360-S” from the list of devices shown. After the headset is connected successfully its blue light blinks 2-3 times every 4 seconds.
Hang the headset on the ears with both hands, as shown in the illustrations below. It is important to use both hands to put on or take off the headset; never pull or push the headset while putting it on or taking it off. Kinivo BTH360-S Bluetooth Stereo Headset...
Short press multifunction Answer call Ringing button once Long press (press and hold) Multifunction button Reject call Ringing about 2 seconds. Release when you hear a tone. Short press multifunction End call Conversation mode button once Kinivo BTH360-S Bluetooth Stereo Headset...
Page 10
Press multifunction button and “+” button at the same time for 8 seconds. Release Delete pairing list Turn off when the blue light and red light are on at the same time for 1.5 seconds. Kinivo BTH360-S Bluetooth Stereo Headset...
You can enjoy music wirelessly through the headset by connecting it to a mobile phone or Bluetooth transmitter that supports A2DP. Status of the Function Operation headset Volume up Playing music Short press “+” button Kinivo BTH360-S Bluetooth Stereo Headset...
Page 12
If this is the case with your phone, select “transmit the sound via Bluetooth” in the settings menu and then choose “Kinivo BTH360-S” as speaker device. The music will then be transmitted to the headset. Please refer to your mobile phone’s user’s manual for further information.
Blue light quick blink - once every Not connected to a device 2 seconds Blue light quick blink - three times Headphones connected to a Bluetooth every 4 seconds device Blue light quick blink continuously Calling/incoming call Kinivo BTH360-S Bluetooth Stereo Headset...
30 seconds Care and maintenance Read the following recommendations carefully before using your BTH360-S headset. Following these, you will be able to enjoy this product for many years. Do not charge in damp and steamy conditions. Keep the charging port covered when the headphones are not being charged.
In the event that this product does not function properly, please contact Kinivo technical support at support@kinivo.com FAQs 1. What does it mean when the red LED blinks twice every 30 seconds? Battery power is low; battery needs to be recharged. Kinivo BTH360-S Bluetooth Stereo Headset...
Make sure the volume is not too low or muted; Make sure the headset is properly connected to your mobile phone; and Make sure the distance between the headset and the cell phone is in the effective range. Kinivo BTH360-S Bluetooth Stereo Headset...
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Specifications Bluetooth version Bluetooth V2.1+EDR Bluetooth profiles HSP, A2DP, AVRCP Kinivo BTH360-S Bluetooth Stereo Headset...
Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no longer carries the same product, then Kinivo reserves the right to substitute the product with a replacement product of like quality and size, suitable for the intended use.
If your product is not functioning or you have any concerns please contact Kinivo Support before returning the product. Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information,...
Page 20
Made in china Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.com...
Need help?
Do you have a question about the BTH360-S and is the answer not in the manual?
Questions and answers