Operation; Reject A Call - Vizualogic CiG Bluetooth User Manual

Connection
After you enter the car and turn the ignition on, the system will link with your phone. If it is the first
time you have connected or your phone was not the last to connect it will take between 40-90 seconds
to connect. If your phone was the last to use the kit then connection will take place in less than 10
seconds. Some phones are faster than others so the kit leaves time for phone with highest priority to
have a chance to connect before connecting another phone. You will hear a positive Bleep when the
kit is connected.
Connection Priority
The system decides on which phone to connect as follows:
Priority 1
Priority 2
This means that if you have three phones linked to the system and you all enter the car at the same time,
then the person who last used the system will be connected. If the last used phone is not found, then
who ever has used the system most in the past will get priority. If you want to change who is using the
kit then turn the bluetooth off on the phone you do not want to connect and restart your vehicle.
Dial
a. Voice Dial
A quick press of the button activates the voice dial feature on your handset, and
when ready the system lets out a "Bleep". Speak out the name of the person you wish to call. These
names must be pre-recorded on the phone. Follow the instructions in your phone user manual on how
to record the names. To cancel a voice dial press the button once more. If the phone has no voice dials
or does not support voice dial you hear 4 negative beeps.
b. Dial a number
c. Redial
To redial a last called number, press and hold the button until you hear one beep after
2 seconds.

Reject a Call

Hold the button down until you hear a beep after 2 seconds to reject an incoming call.
Last phone to have connected.
Phone connected most times to the kit
Enter the number you want to dial on the phone and press the dial button.

Operation