Time Menu - Videocon 325LDF User Manual

ATV MENU LIST - (Continued)
Current Time
Off Time
On Time,
On Program
Reminder Channel,
Reminder Time
Auto Sleep
Language
Zoom
Blue Screen
Keypad Lock
OSD Transparent
TTX Language
BackLight
00:00 to 23:59 This setting displays the time set by user as a Current Time.
This parameter used to switch the TV set into standby at time preset by the user.
00:00 to 23:59 NOTE: Off Time is deactivated when set is switch to standby or mains power supply is
switched off.
These parameters are used to switch the TV set On from standby at a preset time and
00:00 to 23:59, preset program channel. To execute the On Time and On Program set should be in
0 to 199 standby mode.
NOTE: On Time gets deactivated when set is switched off by mains power supply.
This is reminder and presently viewed channel gets changed to the preset program
0 to 199, when Reminder Time reach's Current Time.
00:00 to 23:59 NOTE: Reminder Time gets deactivated and Reminder Channel resets to '1' when set is
switched off by mains power supply.
0,10,20,30,60,90, TV set goes to standby after the preset time in Auto Sleep.
120,180,240 NOTE: Auto Sleep is deactivated when set is switched to standby or mains power
Minutes supply is switched off.
English
French
German
Spanish Spanish
Italian
Russian
Greek
Portugese
Language is used to select OSD display language as per requirement.
Polish
Romanian
Hungarian
Bulgarian
Czech
Serbian
Turkish
16:9
Original
This parameter is used to select Aspect Ratio for picture.
4:3
Zoom
This parameter is used to control screen display in absence of signal. If it is ON then
On
displayed sreeen is Blue and if it is OFF then displayed screen is raster when source is TV
Off
and in case of other source displayed screen is Black.
On
Keypad Lock function is used to lock the operation of the front keys of TV set.
Off
0,1,2,...,9,10 This parameter is used to adjust transparency of menu OSD window.
Russian
Greek This function is used to set TTX Language as per requirement.
Arabic
Farsi
0,1,...,9,10 This parameter is used to adjust the brightness level of panel.
Menu Operation

TIME MENU

OPTION MENU
21