Table of Contents
Advertisement
ES 40 USER MANUAL
R
stage accompany
6 Technical Specifications
Input Sensitivity:
Maximum Input Level:
Input Impedance:
Common Mode Rejection Ratio (CMRR):
Frequency Range:
Gain:
Channel Separation:
Total Harmonic Distortion (THD):
Intermodulation Distortion (IMD):
Signal to Noise Ratio:
Slew Rate:
Damping (with DDC):
Output power @ <1 % THD:
Continuous Power Delivered:
Peak Power Delivered:
1.72 Vrms (+7 dBu)
(full continuous power into 4 Ω)
+22 dBu
22 kΩ each leg
> 70 dB @ 20 Hz - 20 kHz
> 90 dB @ 1 kHz
10 Hz - 20 kHz, -0.4 dB @ 100 W into 8 Ω
10 Hz - 55 kHz, -3 dB @ 100 W into 8 Ω
33 dB (44.7x)
90 dB @ 1 kHz, 100 W into 8 Ω
75 dB @ 20 kHz, 100 W into 8 Ω
< 0.3 % @ 20 Hz - 20 kHz, more than 2 Ω load
at all powers, 1 dB below clipping.
< 0.007 % @ 1 kHz, 100 W into 8 Ω
< 0.05 % @ 20 kHz, 100 W into 8 Ω
< 0.06 % @ 200 Hz - 20 kHz,
F1 = 70 Hz, 4:1, 100 W into 8 Ω
> 110 dB A-weighted
> 40 V/µs @ 8 Ω
10.000 @ 1 kHz, 10 V across 8 Ω
2 x 1000 W into 8 Ω
2 x 1470 W into 4 Ω
2 x 1810 W into 2 Ω
2 x 1240 W into 8 Ω
2 x 2000 W into 4 Ω
2 x 2850 W into 2 Ω
Advertisement
Table of Contents
