Line In Operation; Troubleshooting - Electrohome EAKAR300 Instruction Manual

LINE IN operation

To use the karaoke player as a speaker for another audio device:
1. Connect a 3.5mm cable (not included) into the LINE IN connection on the back of the karaoke system.
Connect the other end of a 3.5mm cable to the AUDIO OUT connection of your external audio device.
2.
Operate the external audio device as you normally would, use the VOLUME knob of the karaoke system to adjust
3.
the volume.
Problem
no power when the
power button is on
no power when
plugged in
no sound from TV
or PA
Cd Player does not
work normally or the
LEd displays "nO", "E"
or "00"
no sound − If audio
is going through TV
or VCR
no sound − when
audio is connected to
a home stereo
OPERATION

TROUBLEShOOTING

Possible Problem
• no power plug connection at the AC
outlet.
• Improper connection between the unit
and the AC power cord.
• The AC outlet may not have power.
• TV or PA system is set to minimum.
• TV or PA system is powered off.
• Patch cables are not connected securely.
• disc is inserted upside down.
• disc is dirty.
• disc is scratched or warped
• A non-standard disc is inserted.
• Moisture has formed inside the Cd deck.
• Karaoke system needs resetting.
• Patch cables are not connected securely.
• Source selection on TV or VCR is not
correct.
• Source selection on your stereo is not set
properly.
• Improper connection to stereo system or
patch cables are not connected securely.
• Insert the power plug into the AC outlet.
• Check the connection between the unit and
the AC power cord.
• Test the power outlet by plugging in another
appliance and turning it on.
• Turn up the volume on the TV or PA system.
• Power the TV or PA system on.
• Ensure white and red patch cables are securely
inserted into both the karaoke system and the
TV/PA system.
• Insert the disc correctly.
• wipe clean with a soft cloth.
• Use a new disc.
• Only use discs bearing the standard logo.
• wait about 20 - 30 mins to let it dry out.
• disconnect the machine from the power source
for 30 seconds then reconnect.
• Ensure white and red patch cables are securely
inserted into both the karaoke system and the
home stereo system.
• Ensure that the source selection on the TV or
VCR is correct.
• Select AUX In as the source for your home
stereo.
• Ensure white and red patch cables are securely
inserted into both the karaoke system and the
home stereo system.
- 14 -
Solution