Vantec NexStar HX2R User Manual page 15

Individual(Normal) Drive Mode:
This mode enables each Hard Drive to be seen
as separate single drives with separate Hard
Drive capacities.
( figure 7-A) ( figure 7-B)
NOTE:
Normal
If you are using Indvidual Drive Mode with
eSATA interface, your eSATA port on the system
ON
must support Port Multiplier to see more than
one drive.
( figure 7-A)
Volume A Volume B Volume A
Volume B
NST-620S3R-BK NST-620S3R-BK
Port 1 Port 2 Port 1 Port 2
Drive A Drive B Drive A Drive B
Equal Disks Unequal Disks
( figure 7-B)
RAID Mode Configuration
11