Yamaha RX-V767 Owner's Manual page 89

■
Specify whether or not audio signal is
output through this unit and a TV
Audio Output
Choose whether audio is played back through this unit or through a
TV.
Amp
Specify whether or not audio signal is output through this unit.
Off Audio is not output through this unit.
On (Default) Audio is output through this unit. When this setting is
selected, audio from the external component is output
in a format compatible with this unit.
OUT1
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 1 jack.
Off (Default) Audio is not output through a TV connected via the
HDMI OUT 1 jack.
On Outputs audio through a TV connected via the HDMI
OUT 1 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
OUT2
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 2 jack.
Off (Default) Audio is not output through a TV connected via the
HDMI OUT 2 jack.
On Outputs audio through a TV connected via the HDMI
OUT 2 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
Setting various functions (Setup menu)
■
Transmitting HDMI audio/video to the TV
during standby mode (Standby Through)
Standby Through
This function allows audio/video signals from HDMI inputs to
continue to be transmitted to a TV when this unit is in standby
mode.
Standby Through On
When the function is " ," audio/video signals
continue to be output to the TV from the last HDMI
before this unit enters standby mode. The HDMI input source can be
dHDMI1-5 dV-AUX
selected using or in standby mode.
Off (Default)
Sets Standby Through to "Off."
On
Transmits audio/video signals from the selected
HDMI input source to the TV.
• When "HDMI Control" is "On," Standby Through function is
automatically enabled and "Standby Through" is not displayed.
• When the Standby Through function is on, the HDMI Through/
iPod Charge indicator on the front panel lights during the standby
mode. This unit consumes approximately 3 W of power.
SETUP
input source
89
En