Dvr Identification; Front Panel - GENIV G4-RTAHD Series User Manual

DVR Identification

Front Panel

The front panel of the DVR is displayed below.
Please refer to the following table for front panel button and indicator information.
Button/Indicator
USB Port
Power Indicator
Remote Control
Indicator
Status indicator
HDD status
indicator
Alarm indicator
Channel
recording
indicators
Power
IR Receiver
Shuttle (Outer
ring)
Jog (Inner ring)
Escape
Icon/Label
USB connection for mouse or external storage device.
Power Power indication light.
ACT When lit, remote control is active for this DVR.
Status This indicator is not used.
HDD If lit, the HDD is in error status
Alarm This indicator is not used.
1 - 16 When lit, the corresponding channel is recording.
Press and hold to power up or shut down the DVR
IR Receives input from the remote control.
•
•
•
•
•
•
•
Esc
Function
In monitor mode, clockwise will move forward one
channel or set of channels and counter-clockwise will
move backward one channel or set of channels.
In menu mode, clockwise will move to the next menu
option and counter-clockwise will move to the previous
menu option.
In playback mode, clockwise will cycle fast forward
speed and counter-clockwise will cycle rewind speed.
In monitor mode, clockwise will cycle forward to the
next window view mode and counter-clockwise will
cycle to the previous window view mode.
In menu mode, clockwise will attempt to move down
one menu option and counter-clockwise will attempt to
move up on menu option.
In playback mode while paused, clockwise will advance
slowly and counter-clockwise will rewind slowly.
In menu mode, return to the previous option or cancel
the current operation.