Other Options - Panasonic KX-TG1223BX Operating Instructions Manual

TG1223-1233BX(e-e).book Page 35 Wednesday, November 15, 2006 3:32 PM

Other options

Changing the base unit PIN
(Personal Identification Number)
For security, the base unit PIN must be
entered when changing certain settings. The
default PIN is "0000".
Important:
L If you change the PIN, please make note
of your new PIN. The unit will not reveal
the PIN to you. If you forget your PIN,
consult your nearest Panasonic service
centre.
1
Press {j/OK}.
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it.
4
Select "Other Options", then press
{>}.
5
Select "Base Unit PIN", then press
{>}.
6
Enter the new 4-digit base unit PIN, then
press {j/OK}.
7
Press {ih}.
Resetting the base unit to its
default settings
1
Press {j/OK}.
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
4
Select "Other Options", then press
{>}.
5
Select "Reset Base", then press {>}.
6
Select "Yes", then press {>}.
Base Unit Settings
7
Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 31, 44
– Base unit ringtone
– Base unit ringer volume (Medium)
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries (KX-TG1233
only)
– Repeater mode
– Recordings, including your greeting
message, caller messages, voice
memos, audible call announcements,
and recorded conversations (KX-
TG1233 only)
35