Summary of Contents for Greentek SHMTM
- Page 1 INST ALLA TION GUIDE ST A TIC AND ST A TIC WITH MOT ORIZED DAMPERS MODELS Horizontal series • MODEL SH • MODEL SHM • MODEL SH • MODEL SHM...
- Page 2 Redefining Indoor Air Quality About Us Imperial Air Technologies Inc. is the only manufacturer that offers you a complete range of products designed to improve indoor air quality, and that provides a wide selection of accessories to facilitate installation.
-
Page 3: Typical Installation
Determine Y our V entilation Needs installation How much fresh air do I need? Good air quality is based in part on the capacity of the home’s ventilation system. Usually, the HRV’s capacity is measured in CFM (Cubic Feet per Minutes) or L/s (Liters per Seconds) of fresh air being distributed in the living space. -
Page 4: Airflow Direction
Exhaust from the supply and supply in return installation Make sure that the Supply air from HRV is at least 3 feet from the forced air system. Can be different from a region to an other. You should check with your local code or the forced air system’s manufacturer. -
Page 5: Installation Kit
Installation Kit Included in the installation kit: • 4 Collars • 1 Condensation Drain Line • 1 Drain Adapter with Nut • 2 Tie Wraps (30”) • 16 screws (#10 x 5/8”) • 4 screws (#10 x 1”) P AGE 5 ST A TIC AND ST A TIC WITH MOT ORIZED DAMPERS MODELS 3. - Page 6 The SPM system is supplied with the HRV to allow one person mounting of unit. attachment system The entire line of Greentek HRV products is designed for installation by a single person. “Single Person Mounting ” will enable you to save time and effort by offering you a variable attachment system and maximizing your basement space.
- Page 7 collar system (Patent Pending T echnologies) Quick and simple to install thanks to our revolutionary “Insert Slide and Fix ” collar system. The “ISF ” collar system by Greentek enables you to manipulate duct within your reach and then insert the collar to the HRV by sliding it in place, for a better and quicker installation.
- Page 8 Motorized Damper balancing system The HRV must be balanced properly in order to operate at maximum performance. Greentek products are equiped with balancing damper to help eliminate the risks. figure 8.5 Static model with motorized dampers (Model SHM) PROFESSIONAL, DELUXE AND FURNACE MODELS 8.
-
Page 9: Condensation Drain Line
Sloped Drain drainage system Greentek HRV units are equipped with an easy-access sloped drain pan. Excess condensation that might accumulate inside the unit migrate to the centre of the drain pan to be evacuated. P AGE 9 ST A TIC AND ST A TIC WITH MOT ORIZED DAMPERS MODELS 9.Condensation Drain Line figure 9.1 Hand screw the drain adapter Insert the threaded drain adapter thru the bottom of the HRV and hand tighten the plastic nut sup-... - Page 10 Greentek TIPS to installer figure 10.2- To make your installation easier use our double collar to install your flex pipe with the outside hooks. Greentek INFO to installer We manufacture a wide selection of : • Insulated Flexpipe • Hoods Greentek TIPS to installer...
-
Page 11: Balancing The Unit
Maximizing the unit’ s performance installation The HRV must be balanced properly in order to operate at maximum performance and avoid problems. Balancing the Unit installation Balancing the unit is an important step in the installation of the HRV. The operation consists of measuring and regulating the volume of fresh air from outside passing through the unit is equal with the exhaust... -
Page 12: Troubleshooting
12. Controls (Model SHM GreenThinker Control The GreenThinker model control is offered with features making your ventilation system simple, easy to operate and backed by a 5 year limited warranty. Greentek’s RD-1 model Peace of Mind 13. Troubleshooting Ensure your comfort in the years to come by using PROBLEMS Greentek... -
Page 13: Maintenance
Choose from the complete range of ventilation accessories and products by “Imperial Air Technologies Inc”. P AGE 13 ST A TIC AND ST A TIC WITH MOT ORIZED DAMPERS MODELS 14. Maintenance figure 14.1 Slide Out the Filters... -
Page 14: Wiring Diagram
Note to installer On older thermostats, energizing the R and G terminals at the forced air system has the effect of energizing the Y termi- nal at the thermostat and therby activat- ing the coolong system. If you identify this type of thermostat, you must use Option 3. -
Page 15: Specifications
All Greentek products are backed by the best limited warranty on the market. Imperial Air Technologies Inc. reserves the right to modify a product, without prior notice, whether in design, colour or specifications, in order to offer at all times a quality product that is highly competitive. - Page 16 Protect the natural world from harmful activities of humans Imperial Air Technologies inc. 500 Ferdinand Blvd. Dieppe, NB Canada E1A 6B9 Toll free: 1 888 724-5211 Visit us at: www.greentek.ca We choose to use recyclable and non-toxic materials when ever possible...
Need help?
Do you have a question about the SHMTM and is the answer not in the manual?
Questions and answers