Depth 2 9/16” (66mm) JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into existing models without notice as a routine expression of our design philosophy. For this reason, Power Series Multichannel Automotive Amplifiers may differ in some respects from their published specifications and descriptions, but will always equal or exceed the original specifications unless otherwise stated.
(on input panel) 2 CHANNEL system installation. Figures 1 through 3 BRIDGED NEON PARALLEL BPx Amplifier show how to configure the JBL Power PARALLEL 2CH/BR (partial rear panel) Series subwoofer amplifiers (models OUTPUT MODE SPEAKER OUTPUTS BPx500.1, BPx1100.1 and BPx2200.1)
BPX500.1 Power Amplifier TROUBLESHOOTING SYMPTOM LIKELY CAUSE SOLUTION No audio No voltage at BATT+ Check voltages at (POWER LED or REM terminals, amplifier terminals is off) or bad or no ground with VOM connection No audio DC voltage on Amplifier may need...
Need help?
Do you have a question about the BPX500.1 and is the answer not in the manual?
Questions and answers