Backyard Discovery Patriot Owner's Manual
  1. Manuals
  2. Brands
  3. Backyard Discovery Manuals
  4. Baby Accessories
  5. Patriot
  6. Owner's manual
Backyard Discovery Patriot Owner's Manual

Backyard Discovery Patriot Owner's Manual

Wooden playcenter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
FAQ's

Assembly Instructions

Warranty Information

Patriot
Wooden Playcenter - 2010
Model: 37210
Manufacturer:
Backyard Discovery
3001 North Rouse
Pittsburg, KS 66762
Made in China
INS-37210-08 Patriot 6/23/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Patriot and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Backyard Discovery Patriot

  • Page 1: Assembly Instructions

    Owner’s Manual FAQ’s Assembly Instructions Warranty Information Patriot Wooden Playcenter - 2010 Model: 37210 Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 Made in China INS-37210-08 Patriot 6/23/11...

  • Page 2: Tools Required For Installation

    Title Page PS Rev. 01/28/2009 Tools Required for Installation: (These are the tools that are generally required for assembly of our playsets. These tools are not included in the playset purchase.) (Level 24”) (Open end Wrenches (Nut drivers ½” & 7/16” ) ½”...

  • Page 3: For Your Records

    Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.

  • Page 4: Positioning Your Playcenter

    Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a lev el surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation.

  • Page 5: Operating Instructions

    Owner’s Manual Play Set Operating Instructions: NOTE : Your children’s safety is our #1 concern. Observi ng the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children. 1. This Playcenter is designed for specific number of occupants whose combined weight should not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the assembly section of instruction manual.

  • Page 6: Maintenance Instructions

    Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’.
  • Page 7 Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission's Information Sheet for playground surfacing material Also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS X3.1 The U.S.
  • Page 8 Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground.
  • Page 9 11. The end beam is not straight up and down. Why not? This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.

  • Page 10: Using The Hardware

    USING THE HARDWARE LEISURE TIME PRODUCTS, INC GYM SETS USE A FEW STANDARD CONNECTIONS. BECOMING FAMILIAR WITH THESE CONNECTIONS WILL SIMPLIFY ASSEMBLY AND INSURE A SAFER PLAY PRODUCT FOR YOUR CHILDREN. How to use Safe-T-Fuse Fasteners Correct Barrel Nut Assembly Lock Washer Bolt Lock Washer...
  • Page 11 Patriot Patriot Model 37210 Assembly Requires Two Moderately Skilled People. If you need assistance with parts or have assembly questions, please call Customer Service 1-800-856-4445 Please read the entire instruction manual carefully before proceeding with the assembly or use of your new gym set.

  • Page 12: Safe Play Area

    9'-6 1/2" Dimensions: General Information: Your set has been designed and engineered for children • The Patriot has One layout option. only and for residential use only. Layout: Ground Dimension Safe Play Area* A maximum of 150 lbs. per child is recommended for 7’-8½”x 21’-5”...

  • Page 13: Parts Locator

    PAGE 11- PARTS LOCATOR...
  • Page 14 PAGE 12- PARTS LOCATOR...
  • Page 15 E1 - RIGHT FRONT TOWER LEG (W100612) - 1 REQ - 36 x 86 x 2274 (1.375 x 3.375 x 89.5) E2 - CENTER FRONT TOWER LEG (W100613) - 1 REQ - 36 x 86 x 2274 (1.375 x 3.375 x 89.5) E3 - LEFT FRONT TOWER LEG (W100614) - 1 REQ - 36 x 86 x 2274 (1.375 x 3.375 x 89.5) E4 - DECK BRACE (W100615) - 8 REQ - 36 x 86 x 394 (1.375 x 3.375 x 15.5) E5 - RIGHT REAR TOWER LEG (W100678) - 1 REQ - 36 x 86 x 2274 (1.375 x 3.375 x 89.5)
  • Page 16 G8 - WALL RAIL (W100624) - 2 REQ - 24 x 134 x 1244 (1 x 5.25 x 49) G9 - BASE BOARD (W100625) - 2 REQ - 24 x 134 x 1156 (1 x 5.25 x 45.5) G10 - FLOOR RAIL (W100626) - 1 REQ - 24 x 134 x 1156 (1 x 5.25 x 45.5) G11 - PICNIC TABLE TOP (W100627) - 2 REQ - 24 x 134 x 1142 (1 x 5.25 x 45) G12 - FLOOR RAIL (W100628) - 1 REQ - 24 x 134 x 1018 (1 x 5.25 x 40.125) G13 - SAND BOX SEAT (W100629) - 2 REQ - 24 x 134 x 520 (1 x 5.25 x 20.5)
  • Page 17 H9 - FLOOR JOIST (W100638) - 2 REQ - 24 x 86 x 908 (1 x 3.375 x 35.75) H10 - BTM FLOOR BOARD SUPPORT (W100677) - 10 REQ - 24 x 86 x 134 (1 x 3.375 x 5.25) K1 - WALL RAIL (W100639) - 1 REQ - 16 x 134 x 1156 (.625 x 5.25 x 45.5) L1 - OUTSIDE FILLER FLOOR BOARD (W100640) - 4 REQ - 16 x 112 x 1168 (.625 x 4.375 x 46) L2 - WALL BOARD (W100641) - 4 REQ - 16 x 112 x 456 (.625 x 4.375 x 18)
  • Page 18 M12 - WINDOW TRIM (W100654) - 1 REQ - 16 x 86 x 806 (.625 x 3.375 x 31.75) M13 - WALL BOARD (W100655) - 7 REQ - 16 x 86 x 616 (.625 x 3.375 x 24.25) M14 - WALL BOARD (W100656) - 9 REQ - 16 x 86 x 660 (.625 x 3.375 x 26) M15 - GABLE BOARD (W100657) - 2 REQ - 16 x 86 x 546 (.625 x 3.375 x 21.5) M16 - WALL BOARD (W100658) - 2 REQ - 16 x 86 x 532 (.625 x 3.375 x 21) M17 - WALL BOARD (W100659) - 13 REQ - 16 x 86 x 456 (.625 x 3.375 x 18)
  • Page 19 R2 - INNER ROOF SLAT (W100785) - 2 REQ - 18 x 114 x 1394 (.75 x 4.5 x 54.875) SC1 - FLOOR BOARD (W100675) - 1 REQ - 16 x 76 x 1168 (.625 x 3 x 46) T1 - SAFETY RAIL (W100676) - 1 REQ - 24 x 34 x 520 (1 x 1.375 x 20.5) M73 LADDER REAR SUPPORT (W100610) - 1 REQ - 16 x 86 x 488 (.625 x 3.375 x 19.25) H76 LADDER RUNG (W100611) - 4 REQ - 24 x 86 x 460 (1 x 3.375 x 18.125) H74 LADDER UPRIGHT LEFT (W100608) - 1 REQ - 24 x 86 x 1290 (1 x 3.375 x 50.75)
  • Page 20 E51 - SWING BEAM ANGLE BRACE (W100948) - 2 REQ - 36 x 86 x 2260 (1.375 x 3.375 x 89) E50 - SWING BEAM END SUPPORT (W100949) - 1 REQ - 36 x 86 x 1226 (1.375 x 3.375 x 48.25) L73 WINDOW SHUTTER (W100786) - 3 REQ - 16 x 112 x 406 (.625 x 4.375 x 16) O4 WINDOW SHUTTER SLAT (W100787) - 6 REQ - 16 x 34 x 1 36 (.625 x 1.375 x 5.375) PAGE 18 - WOODEN PARTS E51 - W100787...
  • Page 21 H100042 5/16 X 1 1/4" H EX HEAD BOLT H100013 5/16 X 2-1/4" H100014 5/16 X 2-1/2" BOLT H100015 5/16 X 2-3/4" BOLT BOLT H100166 5/16 X 4-1/4”" H100012 BOLT 5/16 X 2" H100008 5/16 X 1" H100010 BOLT 5/16 X 1 1/2" H100115 BOLT 5/16 X 1/2"...
  • Page 22 H100110 H100105 A100041 (5/16") 8 x 27 TORX WRENCH LOCK NUT FENDER WASHER H100108 H100070 H100106 8 x 15 8 X 3/4 " 9 X 18 INTERNAL FLAT WASHER WASHER TOOTH HEAD H100102 LOCK SCREW 11 X 25 WASHER FLAT H100031 H100007 H100030...
  • Page 23 PART....... DESCRIPTION......QTY. H100004 .

  • Page 24: Additional Items

    A100021 A100005 2 - GLIDER ARMS TRIANGLE PLATE A100146 A100096 5 HOLE WINDOW FRAME 2 REQUIRED 4- GLIDER CHAIN 3 REQUIRED A100118 16 1/2" METAL GRIP 4 REQUIRED A100010 LARGE WINDOW FRAME 2 REQUIRED A100140 SWING BEAM BRACKET 2 REQUIRED A100025 1 -GLIDER SEAT A100027...

  • Page 25: Items Needed

    HARDWARE NEEDED ITEMS NEEDED 1-E1 Tower Leg 4-5/16” x 2 ¾” Bolts 8-5/16” x 2” Bolts 1-E2 Tower Leg 1-E3 Tower Leg 12-5/16” x 7/8” Barrel Nuts 1-G2 Wall Rail 12- Lock Washers for Bolts 12- Lock Washers for Barrel Nuts 1-G1 Base Board 2-H10 Bottom Floor Support Step 1...
  • Page 26 HARDWARE NEEDED ITEMS NEEDED 4-5/16” x 2 ¾” Bolts 1-E5 Tower Leg 8-5/16” x 2” Bolts 1-E6 Tower Leg 12-5/16” x 7/8” Barrel Nuts 1-E7 Tower Leg 12-Lock Washers for Bolts 1-G3 Wall Rail 12-Lock Washers for Barrel Nuts 1-G1 Base Board 2-H10 Bottom Floor Support Step 2 ( Note Position of Pilot Holes in Tower Legs )
  • Page 27 HARDWARE NEEDED ITEMS NEEDED 12-5/16” x 2 ¾” Bolts 1-G15 Floor Rail 4-5/16” x 2” Bolts 1-G12 Floor Rail 16-5/16” x 7/8” Barrel Nuts 1-G10 Floor Rail 16-Lock Washers for Bolts 1-G14 Floor Rail 16-Lock Washers for Barrel Nuts 6-H10 Bottom Floor Support Step 3 Attach G15 Floor Rail to E1 Front Right Tower leg and H10 Floor Support with 5/16”...
  • Page 28 HARDWARE NEEDED ITEMS NEEDED 8-5/16” x 2” Lag Screws 1-G6 Floor Rail 12-Lock Washers for Bolts 1-G5 Wall Rail/Swing Mount 4-5/16” Spiked T-Nuts 1-G4 Base Brd/ Sand Box 4-5/16” x 4-1/4” Bolts Step 4 With help stand Tower assemblies up and attach G6 Floor Rail to E5 and E1 Tower Legs with 5/16” x 2” Lag Screws and Lock Washers.
  • Page 29 HARDWARE NEEDED ITEMS NEEDED 12-5/16” x 2” Lag Screws 1-G6 Floor Rail 12-Lock Washers for Bolts 1-G8 Wall Rail 1-G7 Floor Rail Step 5 Attach G6 Floor Rail to E7 Left Rear Tower Leg and E3 Left Front Tower Leg with 5/16” x 2” Lag Screws and Lock Washers.
  • Page 30 HARDWARE NEEDED ITEMS NEEDED 8-5/16” x 2” Lag Screws 2-G7 Floor Rails 8-Lock Washers for Bolts 4-A100178 Ground Stakes 4-1/4 x 1” WH Bolts 4-1/4” Lock Washers 4-5/16” Flat Washers 4-1/4 x 5/8” Barrel Nut Step 6 Attach G7 Floor Rail to bottom of E2 Center Front Tower Leg and E6 Center Rear Tower Leg and between E1 and E5 using 5/16”...
  • Page 31 HARDWARE NEEDED ITEMS NEEDED 8-5/16” x 2” Bolts 8-E4 Deck Braces 8-5/16” x 2” Hex Type Lag Screws 8-5/16” x 7/8” Barrel Nuts 8-Lock Washers for Bolts 8-Lock Washers for Barrel Nuts 8-5/16” Flat Washers 8-5/16” Lock Washers Step 7 Level and Plumb structure and attach four E4 Deck Braces to G12, G14 and G6 Floor Rails with 5/16”...
  • Page 32 HARDWARE NEEDED ITEMS NEEDED 4- 1 ½” Wood Screws 2-H1 Floor Joists 8-2 ½” Wood Screws 2-L1 Outside Filler Floor Board 74-1 ¾ Wood Screws 11- M3 Floor Boards Step 8 Attach H1Floor Joist to G6 and G7 Floor Rails on middle floor with 2 ½” Wood Screws. Now attach a L1 Outside Filler Floor Board between Tower Legs with 1 ½”...
  • Page 33 HARDWARE NEEDED ITEMS NEEDED 4-5/16” x 2” Lag Screws 1-G7 Floor Rail 4-Lock Washers for Bolts 2-H9 Floor Joists 4-1 ½” Wood Screws 1-L1 Outside Filler Floor Board 8-2 ½” Wood Screws 9-M3 Floor Boards 60-1 ¾” Wood Screws 1-N1Floor Board Step 9 Attach G7 Floor Rail to E6 and E2 Tower Legs on upper floor between E3 and E7 with 5/16”...
  • Page 34 HARDWARE NEEDED ITEMS NEEDED 8-2 ½” Wood Screws 2- H3 Floor Joists Step 10 On bottom floor attach H3 Floor Joists to G7 Floor Rails using 2 ½” Wood Screws. PAGE 32...

  • Page 35: Hardware Needed

    HARDWARE NEEDED ITEMS NEEDED 6-5/16” x 2” Bolts 68-1 ¾” Wood Screws 2-G9 Base Boards 8-5/16” x 2” Lag Screws 2-T-Nuts 5/16” 2-G4 Base/Sand Box Boards 6-5/16” x 7/8” Barrel nuts 1-L1 Outside Filler Floor Boards 2-5/16” x 2 ¼ Bolt WH 6-Lock Washers for Barrel Nuts 1-N1 Floor Board 16- Lock Washers for Bolts...
  • Page 36 HARDWARE NEEDED ITEMS NEEDED 8-5/16” x 2” Lag Screws 2-G13 Sand Box Seats 8-Lock Washers for Bolts 4-M5 Wall Rails 8-2 ½” Wood Screws Step 12 Attach two G13 Sand Box Seats to G9 and G4 Base Boards with 2 ½” Wood Screws. Attach three M5 Wall Rails to E1and E5 Tower Legs with 5/16”...
  • Page 37 HARDWARE NEEDED ITEMS NEEDED 1-A100146 Window Frame 1-Screw Tapping 14 x 1” 1-M11 Wall Rail 2-M10 Wall Boards 7-5/16” x 1 ½” Bolts 7-Lock Washers for Barrel Nuts 2-M21 Wall Rail 2-M24 Wall Boards 2-5/16” x 2” Lag Screws 20-1 1/8” Wood Screws 1-K1 Wall Rail 2-M16 Wall Boards 7-5/16”...
  • Page 38 HARDWARE NEEDED ITEMS NEEDED 1-Mesh Panel 3-M6 Wall Rails 6-5/16” x 1 ½” Bolts 4-M8 Wall Boards 6-5/16” x 7/8” Barrel Nuts 7-M13 Wall Boards 6-Lock Washers for Bolts 1-M12 Window Trim 6-Lock Washers for Barrel Nuts 2-M23 Window Trim 50-1 1/8”...
  • Page 39 HARDWARE NEEDED ITEMS NEEDED 4-5/16” Spike T Nuts 7-M8 Wall Boards 58-1 1/8” Wood Screws 4-L2 Wall Boards 8-3/4” Washer Head Screws 2-N5 Wall Boards 2-A100010 Window Frames 2-N3 Wall Boards 4-L3 Wall Boards 2-O1 Wall Supports Step 15 Drive four 5/16” Spike T Nuts into G5 Wall Rail/ Swing Mount for later use. Now Attach two M8 Wall Boards against E1 and two against E5 Tower Legs using 1 1/8”...
  • Page 40 HARDWARE NEEDED ITEMS NEEDED 4-5/16” x 2” Lag Screws 1-G8 Wall Rail 4-Lock Washers for Bolts 6-M9 Wall Boards 60-1 1/8” Wood Screws 9-M14 Wall Boards Step 16 Attach G8 Wall Rail to top of E2 and E6 Tower Legs using 5/16” x 2” Lag Screws and Lock Washers. Attach three M9 Wall Boards to G8 and G7 on each side of opening and flush with bottom of floor rail G7 with 1 1/8”...
  • Page 41 HARDWARE NEEDED ITEMS NEEDED 6-2-1/2” Wood Screws 2-M7 Wall Caps 2-5/16” Lock Washers for Barrel Nuts 80-1 ½” Wood Screws 2-M1 Roof Caps 8-#14 x 1” Truss Screws 2-5/16” x 1” Bolts 2-M2 Ridge Cap 2-A100011 Triangle Brackets 2-5/16” x 5/8” Barrel Nuts 12-R1 Roof Slats 4-2”...
  • Page 42 HARDWARE NEEDED ITEMS NEEDED 2-XA100146 Window Frames 2-M4 Gable Boards 64-1 1/8” Wood Screws 4-M19 Gable Boards 8-3/4” Washer Head Screws 4-N4 Gable Boards 4-M22 Gable Boards 2-M15 Gable Boards 2-M20 Gable Boards 4-O1 Wall Supports Step 18 Attach a M4 Gable Board to F1 Rafters using 1 1/8” Wood Screws. Now attach two M19 then two N4, two M22, one M15 and one M20 Gable Board using 1 1/8”...
  • Page 43 HARDWARE NEEDED ITEMS NEEDED 8-5/16” x 2” Lag Screws 2-H4 Picnic Table Seat Support 6-5/16” x 1 ½” Bolts 2-H6 Seat Upright 6-5/16” x 7/8” Barrel Nuts 2-H8 Table Supports 14-Lock Washers for Bolts 2-H7 Table Supports 6-Lock Washers for Barrel Nuts 1-T1 Safety Rail 2-1 ¾”...
  • Page 44 HARDWARE NEEDED ITEMS NEEDED 20-2” Wood Screws 4-H76 Ladder Rungs 4-5/16” x 2” Lag Screws 1-H75 Right Ladder Upright 4-Lock Washers for Bolts 1-H74 Left Ladder Upright 16-2 ½” Wood Screws 1-M73 Ladder Rear Support 2-H2 Picnic Table Seats 2-G11 Picnic Table Tops Step 20 Attach H76 Ladder Rungs to H74 Left Ladder Upright and H75 Right Ladder Upright with 2”...
  • Page 45 HARDWARE NEEDED ITEMS NEEDED 24-1/4” x 1” Phillips Truss Head Bolts 4-M75 Rock Wall Boards 24-1/4” T-Nuts 4-M76 Rock Wall Boards 4-5/16” x 2” Lag Screws 10-M74 Rock Wall Boards 74-1 ½” Wood Screws 1-E72 Rock Wall Rail 24-8x15 Lock Washers 1-E73 Rock Wall Rail 4-Bolt Lock Washers 1-N71 Rock Wall End Board...
  • Page 46 HARDWARE NEEDED ITEMS NEEDED 52-1 1/8” Wood Screws 13-M17 Wall Boards Step 22 On right side of set attach seven M17 Wall Boards to Wall Rails with a 2-7/8” space using 1-1/8” Wood Screws. On back side of set attach six M17 Wall Boards to Wall Rails with a 2-5/8” space using 1-1/8” Wood Screws. 2 5/8”...
  • Page 47 HARDWARE NEEDED ITEMS NEEDED 12-1 ½” Wood Screws 6-O4 Window Shutter Slats 3-L73 Window Shutters Step 23 Attach Window Shutters by using 1-½” Wood Screws through O4 Window Shutter Slats through L73 Window Shutter into Wall Boards. PAGE 45...
  • Page 48 HARDWARE NEEDED 11-Lock Washers for Bolts ITEMS NEEDED 9-5/16” x 7/8” Barrel Nuts 2-5/16” X 1-1/2” Barrel Nut 2-5/16” x 3-3/4” Bolts 2-E51 Swing Beam Angle Braces 2-5/16” x 3-1/4” Bolt WH 8-3/8” x 5 ¾” Hex Type Bolts 2-5/16” x 4-1/4” Bolts Hex 1-SP50 Swing Beam Support 2-A100005 Triangle Plates 8-3/8”...
  • Page 49 HARDWARE NEEDED ITEMS NEEDED 2-5/16” x 5 ¾” Bolts 4-A100066 Swing Hanger Bushings 6-5/16” Lock Nuts 4-H100097 Swing Hangers 6-Fender Washers 2-A100027 Swing Belts 4-Flat Washers 2-A100021 Glider Arms 1-A100025 Glider seat 4-A100047 57” Inch Chain 4-A100096 47” Inch Chain 2- Bags of 4 A100069 Quick Links 4-A100067 Glider Support Caps Step 25...
  • Page 50 Assembly Instructions Open Spiral Slide PAGE 48...

  • Page 51: Parts Identification

    Parts Identification (1) Post Hub Cap 1- Top Section (1) Post End Cap 6- Mid Sections (5' Deck Height) 5- Mid Sections (4' Deck Height) (37) 1" Tapping Screws (INCLUDED IN FORT HARDWARE BAG) 1- Bottom Section 3" x 74-1/2" Center Post *Please read through the instructions before beginning assembly* COMPLETELY...
  • Page 52 Step 26 {Center Post Assembly} Attach post cap to the bottom section of the post. 3” x 74-1/2" Center Post Post End Cap Step 27 {Positioning the Center Post} With an adult helper, slide the top section of the slide onto the center post and position it level on the fort entrance.
  • Page 53 Step 29 {Stabilizing the Center Post} With your adult helper, place the top section of the slide back onto the center post and position the slide at the fort entrance. Place the post into the hole and level it. When level, hold the post in place as you fill in the hole with dirt.
  • Page 54 Step 30 {Connection the Sections - 1} Begin by connecting the bottom section and one mid-section. Insert the tongue of the mid-section into the groove of the bottom section and attach with four 1" screws through the pilot holes along the bottom side.
  • Page 55 Step 33 {Height Adjustment} Adjust the slide on the center post until the top section of the slide sits square on the fort floor. Have an adult helper hold the slide in position while you drill through the bottom section and the center post with a 3/16"...
  • Page 56 HARDWARE NEEDED 2-5/16 x 1/2” Bolts 2-5/16” x 5/8” Barrel Nuts 2-3/4” Washer Head Screws 2-Lock Washers for Bolts 2-Lock Washers for Barrel Nuts Step 36 After you have assembled slide per instructions, center the Slide in opening and using a 3/8” drill bit, drill a hole in the two outside indentions in Slide and through Floor Boards and attach using 5/16”...
  • Page 57 ITEMS NEEDED HARDWARE NEEDED 1-A100020 I.D. Plate 4- 1/4” Lock Washers for Bolts 2-A100178 Ground Stakes 4- 1/4” Lock Washers for Barrel Nuts 4-A100118 Hand Grips 4-1/4” x 5/8” Barrel Nuts 4-Flat Washers 4-#8x3/4” Wood Screws 2-1/4” x 1/2” Bolts 6-5/16”...

  • Page 58: Limited Warranty

    Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay.
  • Page 59 Backyard Botanical, Adventure Playsets, y Leisure Time Products. Backyard Discovery garantiza que este producto no tiene defectos de material ni de mano de obra durante el período de un (1) año a partir de la fecha original de compra. Esta garantía de un (1) año ampara todas las piezas incluyendo la madera, los herrajes, y accesorios.

This manual is also suitable for:

Patriot 37210

Table of Contents