Advertisement
Quick Links
X0057
Please keep this instruction sheet for future reference, as it contains important information.
Requires three "AA" (LR6) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
Actual product may appear different from the photos.
fisher-price.com
Advertisement
Related Manuals for Fisher-Price X0057
Summary of Contents for Fisher-Price X0057
- Page 1 X0057 Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” (LR6) alkaline batteries (not included) for operation. Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Actual product may appear different from the photos.
-
Page 2: Consumer Information
1-800-432-5437 (US & Canada) FCC Rules. These limits are designed to provide reasonable 1300 135 312 (Australia) protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. will not occur in a particular installation. If this equipment does Hearing-impaired consumers: 1-800-382-7470. cause harmful interference to radio or television reception, which Outside the United States: can be determined by turning the equipment off and on, the user Canada: Mattel Canada Inc., 6155 Freemont Blvd., is encouraged to try to correct the interference by one or more Mississauga, Ontario L5R 3W2;... -
Page 3: Battery Installation
Assembled Parts Battery Installation CAUTION 1,5V x 3 “AA” (LR6) This package contains small parts. For adult assembly only. • Locate the battery compartment on the bottom of the toy. Upper Wall Lower Wall • Loosen the screw in the battery compartment door and remove the door. • Insert three, new “AA” (LR6) alkaline batteries. Hint: We recommend alkaline batteries for longer battery life. • Replace the battery compartment door and tighten the screw. • If this product begins to operate erratically, you may need to 3 Ramps Ramp Ramp (Labeled 1) - Page 4 Assembly Lower Wall Upper Wall Base Base • Fit the upper and lower walls together, as shown. • Place two of the bases on a flat surface, as shown. • Fit the wall assembly into each base and push to “snap” in place. Hint: The wall is designed to fit the bases one way. If it does not seem to fit, turn or switch one or both bases around and try again! • Insert four screws into the holes in the wall assembly and tighten.
- Page 5 Assembly Ramps (Labeled 1) Base • Locate two of the ramps labeled 1. • Fit the ends of the ramps into the slots in the wall. • Fit the bottom of the arch into the remaining base. Push to "snap" in place. Hint: The arch is designed to fit into the base one way. If it does not seem to fit, turn the base around and try again. Ramp (Labeled 3) Top Ramp • Locate the ramp labeled 3.
- Page 6 Assembly Ramp (Labeled 1) • While holding each ramp in place, push the ramps on both • Carefully turn the assembly around. sides of the wall to "snap" in place. • Fit the ends of the remaining ramp labeled 1 into the slots in the wall. Ramp (Labeled 2) Long Ramp • Locate the ramp labeled 2. • Fit the ends of the ramp into the remaining slots in the wall. • First fit the tab on the long ramp into the slot in the base Push to "snap" the long ramp in place. • Then fit the tab on the other end of the long ramp into the slot under the top ramp . Push to "snap" in place.
- Page 7 Assembly Decoration Loop-the-Loop Ramp • Fit the tabs on the ends of the loop-the-loop ramp into the slots in the base. • Push to "snap" the loop-the-loop ramp in place. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied.
- Page 8 Fun Songs and Sounds! Fit the flags into any of the sockets on the toy! • Slide the vehicles down the ramps for double roller coaster action! • Press the button to send a vehicle down the side ramp! • Watch the vehicle drive through the loop-the-loop. • Slide the power switch on the bottom of the toy ON . When you are finished playing with this toy, slide the power switch OFF . Power Switch • Lift the jump at the end of the loop to send the vehicle flying!