SKYTRONIC 171.310 Operation Manual

2-channel vhf wireless microphone system

Advertisement

Quick Links

2-Channel VHF Wireless
Microphone System
Model Nos:
171.310
173.8MHz (Handheld) + 174.6MHz (Headset) - (UK)
171.311
175.0MHz (Handheld) + 174.2MHz (Headset) - (UK)
171.313
197.32MHz (Handheld) + 199.82MHz (Headset) - (EUROPE)
171.314
198.25MHz (Handheld) + 199.70MHz (Headset) - (EUROPE)
Operation Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 171.310 and is the answer not in the manual?

Questions and answers

Summary of Contents for SKYTRONIC 171.310

  • Page 1 2-Channel VHF Wireless Microphone System Model Nos: 171.310 173.8MHz (Handheld) + 174.6MHz (Headset) - (UK) 171.311 175.0MHz (Handheld) + 174.2MHz (Headset) - (UK) 171.313 197.32MHz (Handheld) + 199.82MHz (Headset) - (EUROPE) 171.314 198.25MHz (Handheld) + 199.70MHz (Headset) - (EUROPE) Operation Manual...
  • Page 2: Handheld Transmitter

    VOLUME VOLUME Receiver AF LEVEL AF LEVEL CHANNEL A CHANNEL B PROFESSIONAL 2-CHAN NEL WIRELESS SYSTEM ANT.B ANT.A POWER Bodypack Transmitter VOLUME VOLUME Headset Mic AF LEVEL AF LEVEL CHANNEL A CHANNEL B PROFESSIONAL 2-CHAN NEL WIRELESS SYSTEM ANT.B ANT.A POWER Handheld Transmitter Antenna...
  • Page 3 171.314 198.25MHz (Handheld) + 199.70MHz (Headset) - (EUROPE) Thank you for buying this Skytronic VHF Wireless System. Please read through these operation instructions so you will know how to operate your model properly. After you read it, put it away in a safe place for future reference.
  • Page 4: Specifications

    SPECIFICATIONS A. Overall system Oscillation mode: ............Quartz controlled Carrier Frequency Range: .
  • Page 5 BODYPACK AND HEADSET Operation Push the battery cover on the front of the bodypack as per the diagram above and install a 9V battery, taking care to fit it with the correct polarity. Check the battery by switching the microphone ON. The LED will come foe one second and then go off, this indicates correct operation.
  • Page 6: System Installation

    SYSTEM INSTALLATION To connect the wireless microphone to your amplifier system refer to the installation diagram above. Using the supplied screened jack-to jack lead, connect from the AF OUT jack socket to the MICROPHONE INPUT socket on your amplifier. Plug the mains power adaptor into a suitable mains socket and plug the lead connector into the DC 12V input socket.
  • Page 7: Trouble Shooting

    TROUBLE SHOOTING The wireless microphone is not turned on. Turn on the wireless microphone The on air The microphone receiver is not turned on. Turn on the microphone receiver indicator does and the connected audio equipment not light up The microphone receiver is not connected Turn on the microphone receiver properly.
  • Page 8 w w w . s k y t r o n i c . c o . u k w w w . s k y t r o n i c . c o m...

This manual is also suitable for:

171.311171.313171.314

Table of Contents