Advanced Operation; Spray Button - Tricity Bendix TIRSS2211 Instruction Manual

Table of Contents

Advertisement

Shot of Steam Button
This feature may be used during steam or
dry ironing but only when the iron is at
highest settings.
Press the Shot of Steam button to release
a surge of steam. You may need to press
the button a few times to prime the
system. Wait a few seconds for the steam
to penetrate the fabric before pressing the
button again.
Excessive use of this feature will cause
the iron to cool, and the pilot light will illuminate. If this happens, wait for the pilot
light to go out before using the feature again.
Vertical Shot of Steam
Set the iron to its highest temperature and
wait for the pilot light to go out.
Set the iron vertical. Hold the iron away
from you and 15 – 30 centimetres from the
garment.
Press the Shot of Steam Button once. Steam
penetrates into the garment removing the
wrinkles.
For stubborn wrinkles: set the iron back on
its stand and wait a few seconds. Repeat the
procedure once more. Most wrinkles can be removed within three presses.
Warning: DO NOT allow anyone to come near you during this process.
NEVER allow steam to get anywhere near your body or clothing or apply steam to
clothes or fabrics that are being worn by human or pets. DANGER OF SCALDING.
Hold the iron facing away from you at all times. DO NOT OVERREACH or operate
the iron while standing on a ladder etc.

Spray Button

Press the spray button to spray water on
the material. It may be used for steam or
dry ironing.
Note: To avoid staining, do not use the
spray on silk or synthetics, and be careful
when you iron delicate fabrics.
Note: For Spray and Shot of Steam
functions to operate, the water tank
must be at least one-quarter full.
If these features stop working place the iron on its stand and fill the water tank.
During Ironing:
In between operations always stand the iron on its heel.
NEVER leave the iron face down.
During use, the anti drip system may emit a loud clicking sound, particularly when
the iron heats up or cools down. This is normal and indicates that the system is
functioning correctly.

Advanced Operation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tir2410

Table of Contents