Amped Wireless UA600EX User Manual page 54

UA600EX
g. Uninstall the software by clicking Start, then select Control Panel, then select Programs. Find the
Amped Wireless program and uninstall it. Once fully uninstalled, remove the adapter from your USB
port, reinstall the Amped Wireless software using the supplied instructions and try again.
Nothing happens when the adapter is plugged in.
a. Unplug the USB adapter from the USB port and plug it back in firmly. Re-scan for wireless networks.
b. Check that the PRIMARY cable is being used to connect to your computer.
c. (Mac Solution)You may need to activate your wireless adapter. Click the Apple icon, select System
Preferences, then click on Network. Highlight the adapter titled Ethernet Adaptor (en#) for OS X 10.5
and below and click Advanced, then click Apply. For OS X 10.6, select the adapter titled 11n Adapter
and click Apply. Try to scan for networks again.
d. (Windows Solution) The wireless adapter may be disabled. Go to the Start menu, select Control
Panel. Then select Device Manager and locate the Amped Wireless adapter under the Network
Adapters category. Right click the Amped Wireless adapter and check to see if it is disabled. If
disabled, enable the adapter and try to scan for networks again. If there is a problem with the driver,
it will also be displayed here. Check solution (e) to solve this issue.
USER'S GUIDE
53