CDA HVG 96 Series Manual For Installation, Use And Maintenance page 10

10
Correct Positioning of the Auxiliary, Semi-rapid and Rapid Burners
– It is very important to check that the burner flame spreader "F" and the cap "C" have been correctly
positioned (see figs. 8 and 9). They shall be level and must not rotate. Failure to do so can cause serious
problems.
– The pan supports shall be correctly positioned as indica-
ted in fig. 10. The pan supports shall be level and must not
rotate.


Be sure not to fit the triple-ring burner pan support on the
auxiliary, semirapid or rapid burners. The triple-ring burner
pan support IS ONLY to be used on the triple-ring burner.
Ignitor " S"
C
F
Flame failure
probe "T"
Fig. 8
Fig. 9
Fig. 10