Baby Trend Nursery Center Instruction Manual page 6

ASSEMBLY
TO ASSEMBLE BASSINET
Metal Support Tubes
(2 male, 2 female)
Fig. 18
Fig. 19
Fig. 20
Fig. 21
9
Copyright © 2007 - 2009, Baby Trend Inc., All Rights Reserved.
Bassinet
ATTENTION:
Playard must be fully assembled and securely
locked before installing or using the bassinet
feature. (See To Assemble Playard section)
You will need to remove the mattress from the
bottom of the Playard to use inside your Bassinet.
1. Position the Bassinet over and down into the
fully assembled Playard. Secure in place by
pushing down firmly on each plastic support
clip until all are snapped into place (Fig. 18).
2. Assemble Mattress Support Tubes
equipped; otherwise, skip to step 4)
inserting the two (2) male tubes into the two
(2) female tubes (Fig. 19).
3. Insert both, assembled, Mattress Support
Tubes into the loops provided on the bottom
of the Bassinet (Fig. 20).
4. Place the Mattress into the Bassinet with the
padded side facing upward (Fig. 21)
NOTE: Fasten tabs underneath the Mattress
secure it in place.
TO REMOVE BASSINET
1. Remove Mattress from Bassinet.
2. Remove Canopy.
3. Unsnap all clips and lift Bassinet.
TO ASSEMBLE CHANGING TABLE
WARNING
FALL HAZARD:
prevent death or serious injury,
always keep child within arm's
reach.
Always use restraint belt to prevent
falls, see page 15 for details.
Contents:
(a) 2 Long Curved Bars
(if
(b) 2 Short Bar with Connector Knobs
by
(c) 1 Changing Table
ATTENTION:
Playard must be fully assembled and securely
locked before installing or using the changing
table feature. (See To Assemble Playard section)
1. Connect the two (2) Long Curved Bars
together (Fig. 22).
2. Insert the assembled curved bars into the
Changing Table fabric (Fig. 23) Slide the
Curved Bars around inside sleeve of the
Changing Table.
3. Connect the two (2) Short Bars to each end
of the Long Curved Bar (Fig. 24) Make sure
that the knobs are both facing down and the
same direction on each end. (Fig. 25)
ASSEMBLY
(a)
(b)
To
Copyright © 2007 - 2009, Baby Trend Inc., All Rights Reserved.
(c)
Fig. 22
Fig. 23
Fig. 24
Fig. 25
10