Advertisement
19
Install switch plate by placing over
the 2 screws and twisting into place.
Install screw removed and tighten all
3 screws securely.
22
Remove twin adhesive tape from the
black capacitor as shown above.
25
Install switch cap into switch plate
housing, align the 3 holes and install
3 screws and tighten securely.
Setting the reverse switch in the
left hand side will result in down-
ward airflow and setting the
switch in the right hand side will
result in upward airflow.
© 2011 Monte Carlo Fan Company
20
Push plug from fan and plug from
switch plate together. Match the
color strips on the plugs.
23
Place and press firmly on the capaci-
tor to stick it to the switch housing.
Be sure it is secure.
Reverse switch
21
Black capacitor box needs to be
stuck to the switch housing. Not
being attached can cause motor
noise.
24
Remove the 3 screws from switch
cap.
5
2/10/2012
Advertisement
