Panel Description - Cisco Digistar EoC User Manual

Digistar ethernet over coax end-point e320.1
Table of Contents

Advertisement

Panel Description

EP Front Panel Description
The following illustration shows the connectors and LED status indicators on
the front panel of the EP.
1.
LAN1/LAN2 — RJ-45 Ethernet ports.
2.
SYNC — On to indicate that a HPNA master is detected.
3.
HPNA — On to indicate that a HPNA master is established.
4.
LAN1 — On to indicate that Ethernet link is established.
5.
LAN2 — On to indicate that Ethernet link is established.
6.
POWER — On to indicate that power is being applied.
7.
STB/TV —F-type connector connects to a set-top box or TV.
EP Back Panel Description
The following illustration shows the back panel of the EP.
Continued on next page
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digistar e320.1

Table of Contents