Cub Cadet 98M Operator's Manual page 17

Troubleshooting
Problem
Uneven cut
Mower will not self propel
Cause
1. Wheels not positioned correctly.
2. Dull blade.
1. Belt not installed properly.
2. Debris clogging drive operation.
3. Damaged or worn belt.
Remedy
1. Place all four wheels in same height position
(if equipped with individual height adjusters).
2. Sharpen or replace blade.
1. Check belt for proper pulley installation and
movement.
2. Stop engine, disconnect spark plug boot,
and clean out debris.
3. Inspect and replace belt.
8
17