1. Manuals
  2. Brands
  3. Solana Manuals
  4. Hot Tub
  5. DRAFT 10
  6. Owner's manual

Solana DRAFT 10 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
™
OWNER'S MANUAL
Watkins Manufacturing Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRAFT 10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solana DRAFT 10

  • Page 1 ™ ™ OWNER’S MANUAL Watkins Manufacturing Corporation...
  • Page 2 Solana Spa Dealer. They are trained professionals who are familiar with the product as well as ™ new spa ownership concerns. Their expertise will facilitate the enjoyment of your new Solana spa. ™ The Serial Number/Identification label is located within the equipment compartment of your Solana spa.
  • Page 3 Important! Important! unsupervised access to a pool (or spa) by children under 5 years of age. Your Solana ™ spa is equipped with a locking cover. As a general practice, your local Building Department will inform you of any applicable barrier requirements at the time a permit is obtained for the installation of an electrical circuit.

  • Page 4: Table Of Contents

    Deck Installation Freshwater Silver Ion Purifier Replacement ® Outdoor Installation Chlorine (Sodium Dichlor) How to Move the Solana ™ Common Water Chemistry Questions How to Remove and Replace the Front Access Panel Water Terminology Spa Leveling Instructions VI. SERVICE INFORMATION...

  • Page 5: Safety Information

    • To reduce the risk of injury, lower water temperatures are recommended for young children. Children are especially sensitive to hot water. • Make sure you always lock the child resistant locks after using the spa for your children’s safety. Every Solana ™...
  • Page 6 ™ VOIDING THE ISK OF LECTROCUTION ANGER ISK OF ELECTROCUTION • Connect only to a grounded source. • Do not bury the power cord. A buried power cord may result in death or serious personal injury due to electrocution if direct burial-type cable is not used, or if improper digging occurs.
  • Page 7 ™ the terminal box that is provided for this purpose if in accordance with National Electrical Code ANSI/NMFPA70-1993. • Do not permit any electrical appliances, such as a light, telephone, radio, or television within 5 feet (1.5 m) of a spa. Failure to maintain a safe distance may result in death or serious personal injury due to electrocution if the appliance should fall into the spa.
  • Page 8 • Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems or diabetes should consult a physician before using spa. NCLEAN WATER ™ • Keep the water clean and sanitized with correct chemical care. The recommended levels for your Solana spa are: Free Available Chlorine (FAC): 3.0-5.0 ppm Water pH: 7.4-7.6...
  • Page 9 • Test the water with your hand before entering the spa to be sure it’s comfortable. AFETY Each Solana ™ spa is shipped with a SAFETY SIGN in the owner’s package. The sign, which is required as a condition of Product Listing, should be permanently installed where it is visible to the users of the spa.

  • Page 10: Important Spa Information

    • Attempt to open the electrical control box. There are no user serviceable parts inside. Opening of the control box by the spa owner will void the warranty. If you have an operational problem, carefully go through the steps outlined in the Troubleshooting section. If you are not able to resolve the problem, contact your authorized Solana ™...

  • Page 11: Installation Instructions

    Consult your local code authority to determine if an electrical outlet with a cover is required for your installation. If it is, a suitable outlet may be purchased from your Authorized Solana ™...

  • Page 12: Deck Installation

    Plus, a spa surrounded by dirt or grass will soon be filled with dirt or grass from users’ feet; therefore, it is important to get it onto a solid foundation as soon as possible. HOW TO MOVE THE SOLANA ™...

  • Page 13: How To Remove And Replace The Front Access Panel

    ™ HOW TO REMOVE AND REPLACE THE FRONT ACCESS PANEL Your spa uses three panels that are attached to the frame. These panels are referred to as side panels and a front panel. The front panel is located below the control panel. Behind the front panel, you’ll find all the electrical components. The front panel is held onto the frame with six Phillip screws.

  • Page 14: Spa Leveling Instructions

    Possible cord exits 3. Carefully lift and pivot the carpenter’s level (so as not to knock over your stack of shims) to the remaining corner. The Solana ™ spa may be shimmed under any of the base supports shown in the bottom view of the spa. Place the required number of shims under the end of the level at each corner and along the rounded side, until a level reading is achieved at all locations (five total, as shown).

  • Page 15: Electrical Requirements And Precautions

    Conversion requires electrical modification within the control ™ ™ box (contact an authorized Solana Service Technician) and the installation of an electrical sub-panel (available from your Solana Dealer). A licensed electrician must install the sub-panel. LECTRICAL EQUIREMENTS The spa must be connected to a 115 volt, 15 amp (30 amp for converted models) grounded circuit.
  • Page 16 , note #3, on page 13. NSTALLATION OTES If you choose to convert your spa to 115 volt 30 amp operation (contact an authorized Solana ™ Spa Service Technician to perform the conversion), a licensed electrician must install the sub-panel (available from your Solana ™...
  • Page 17 3. Using a pair of needle nose pliers, carefully move the JM1 jumper from pins 2 and 3 to pins 1 and 2 (see Figure 2). ™ A licensed electrician must install the sub-panel (available from your Solana Spa Dealer) to supply power to the spa.
  • Page 18 ™ 30 A MP SUB PANEL WIRING INSTRUCTIONS NOTE: The sub-panel must be placed within 100 feet of the main electrical service panel, and between 5 and 50 feet away from the spa. Refer to the wiring diagram below. 1. Connect the #10 AWG, WHITE [NEUTRAL] wire from the main electrical service panel to the sub-panel NEUTRAL bar. 2.
  • Page 19 If the GFCI breaker fails to operate in this manner, it is an indication of an electrical malfunction and the possibility of an electric shock. Disconnect the power until the fault has been identified and corrected. ™ IMPORTANT: Should you ever find the need to move or relocate your Solana spa, it is essential that you understand and apply these installation requirements. Your Solana ™...

  • Page 20: Spa Specifications/Overhead View

    ™ SOLANA ™ VERHEAD PECIFICATIONS 8 Precision ® jets ® Moto-Massage Cupholders HORIZONTAL DIMENSIONS: 67” x 67” (170 cm x 170 cm) Armrest HEIGHT (without cover): 29” (74 cm) Spa pillow EFFECTIVE FILTER AREA: 30 sq. ft. (2.7 sq. meters) HEATER: 1000 watts (1.0 kW)

  • Page 21: Equipment Compartment View

    ™ QUIPMENT OMPARTMENT 1. 1.0 kW Heater 2. Spa Drain Valve 3. Electrical Control Box 4. Compression Unions 5. Jet Pump...

  • Page 22: Operating Instructions

    ™ 1. Close the drain, attach the drain cap and fill the spa with water through the filter compartment. The water level of your Solana should be maintained at seven (7) inches below the bar top (top of the spa), or even with the top of the filter.
  • Page 23 ™ jet system and remove any remaining air from the heating system, push the JETS button twice to make the jet pump run on high speed for one minute. Once the jet system is fully operational (as indicated by strong, non-surging jets), priming of the spa is complete.

  • Page 24: Heating And Hydromassage Systems

    ™ OPERATION NOTES: 1. The Solana ™ spa is equipped with a 10-minute Tranquil Mode timer delay on the heating/maintenance mode. Whenever the high speed mode of the jet pump has been turned off, it will take 10 minutes before the low speed of the jet pump and heater become activated, unless the JETS button is pushed again.
  • Page 25 32°F, the heater may not be able to raise the spa water to the desired temperature, and the heater and low speed cycle will run continuously, resulting in substantially higher operating costs. IMPORTANT: The 115 volt electrical system of the Solana ™...
  • Page 26 ® ® ™ not a closed air control valve, a pump set on low speed, or a clogged filter cartridge, then your Solana Spa Service Center should be contacted. SERVICE NOTE: A slow or non-moving Moto-Massage jet may indicate that the filter cartridge pores are obstructed with dirt, body ®...

  • Page 27: Safety Equipment

    ™ ® RECISION Precision Jets are in a group of eight. They are designed to perform a soft, soothing massage on your back and shoulders. Adjust their ® pressure using the Comfort Control lever. ® SAFETY EQUIPMENT A. GFCI: The Ground Fault Circuit Interrupter, located on the end of the power cord, is a safety device that is designed to sense as little as 5 milliamps of electrical current leakage to ground.

  • Page 28: Comfort Control System

    MAX allows for the same volume of air to flow to all ® ® ™ Moto-Massage jets and Precision jets simultaneously. On the Solana , the jet faceplate is then used to control the intensity of the ® ® rotary hydromassage jet. NOTE: Always turn the Comfort Control selector to the MIN position anytime the spa is not being used.
  • Page 29 ™ C. TEMPERATURE CONTROLS: The set temperature range is from 50°F to 104°F (10°C to 40°C). Higher temperatures can be reached by using one of three codes: U1, U2 and U3. These are progressively warmer, with U3 the highest at approximately 106°F. (The temperature of any setting may rise slightly depending on the current use and condition of your spa, and outside temperature.) The factory-set temperature of the spa water is 102°F (39°C).

  • Page 30: Spa Care And Maintenance

    3. Open the valve by turning the knob counterclockwise. The spa will drain almost completely by gravitational flow. Any remaining water should be removed using a soft towel. IMPORTANT: All Solana ™ spa models will drain almost completely through the main drain valve. Use a soft towel to remove any remaining water.

  • Page 31: Filter Maintenance

    FILTER MAINTENANCE ™ As with any water filtering system, the filter cartridge may become clogged, resulting in reduced water flow. In your Solana spa, it is important to maintain a clean, unobstructed filtering system to ensure maximum performance from the jets. Watkins Manufacturing Corporation recommends the filter cartridge be cleaned with a filter cleaner at least once every month.

  • Page 32: Care Of The Exterior Finish

    This will return the original luster and shine to the marred spa shell surface. SERVICE NOTES: 1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your Solana ™...
  • Page 33 IMPORTANT: Some surface cleaners contain eye and skin irritants. Keep all cleaners out of the reach of children and use care when applying. IDING The spa siding of the Solana ™ spa is manufactured from Endurol , a durable U.V.-resistant material. Even so, monthly cleaning and ®...
  • Page 34 ™ 2. Rinse off the underside of the cover with water only (do not use soap), and wipe it clean with a dry rag. 3. To condition the cover after cleaning, apply a thin film of Cover Shield to the vinyl surface and buff to a high luster. UTDOOR SPA USE 1.

  • Page 35: Care Of The Spa Pillow

    ™ CARE OF THE SPA PILLOW The spa pillow will provide years of comfort if treated with care. The pillow has been positioned above the water level in order to minimize the bleaching effects of chlorinated water and other spa water chemicals. To extend its life, whenever the spa shell is being cleaned, the spa pillow should be removed and cleaned.

  • Page 36: Prevention Of Freezing

    (or neighbor) is not available to assist with the water maintenance, draining or winterizing of the spa is recommended. PREVENTION OF FREEZING Your Solana ™ spa has been designed and engineered primarily for indoor applications. In areas where the ambient temperature falls below 32°F, the spa heater and low speed cycle will run continuously, and the desired spa temperature may never be achieved.
  • Page 37 When replacing, do not overtighten. O REACTIVATE Reinstall the filter cartridge, close the main drain and reinstall the drain cap. Follow the Start-Up and Refill Procedures to make your Solana ™ spa operational.

  • Page 38: Water Quality And Maintenance

    ™ V. WATER QUALITY AND MAINTENANCE t’s important to have clean water. Water maintenance is one of the least understood, yet most important areas of spa ownership. Your dealer can guide you through the process of achieving and maintaining perfect water in your spa, given your local conditions. Your program will depend on your water’s mineral content, how often you use your spa, and how many people use it.
  • Page 39 ™ • pH • Sanitizer Two types of testing methods are recognized and recommended by Watkins: The Reagent Test Kit is a method which provides a high level of accuracy. The reagents come in either liquid or tablet form. Test Strips are a convenient testing method used by many spa owners. Keep in mind that test strips are susceptible to heat and moisture contamination, which will result in inaccurate readings.
  • Page 40 ™ HEMICALS ATER IMPORTANT: All spa water chemicals, including granulated dichlor, MPS, granulated pH increaser or decreaser, granulated total alkalinity increaser, calcium hardness increaser, liquid stain and scale inhibitor, and liquid de-foamer must always be added directly into the filter compartment while the jet pump is running in high speed mode, and it must run for a minimum of ten minutes. O ADMINISTER SPA WATER CHEMICALS 1.

  • Page 41: The Solana Spa Water Maintenance Program

    ™ THE SOLANA ™ SPA WATER MAINTENANCE PROGRAM Each step in your water maintenance program is dependent on the completion of the previous steps. Omitting a step or failing to reach the recommended range may cause an imbalance in your water’s chemistry. Unbalanced water chemistry can damage the spa and its components as well as cause discomfort for the user.
  • Page 42 ™ (CH) ALANCING THE ALCIUM ARDNESS A. The recommended Calcium Hardness (CH) level for your spa is 150-200 ppm. B. Calcium Hardness is a measure of the total amount of dissolved calcium in the water. Calcium helps control the corrosive nature of the spa’s water.

  • Page 43: Spa Water Quick Reference Guide

    ™ ™ THE SOLANA SPA WATER MAINTENANCE QUICK REFERENCE GUIDE Ideal Range (ppm) What Chemicals to Use Steps Minimum Maximum To Raise To Lower 1 Total Alkalinity Sodium Hydrogen Sodium Bisulfate Carbonate or Sodium Bicarbonate 2 Calcium Hardness 150 Calcium Hardness...
  • Page 44 ™ • The water may become irritating to spa users. • The spa’s equipment may corrode. If the pH is too low, it can be increased by adding sodium hydrogen carbonate to the spa water. D. If the pH level is too high, the following may result: •...

  • Page 45: Solana Water Treatment Guide

    ™ ™ SOLANA WATER TREATMENT GUIDE At spa startup Follow spa Start-Up and Refill Procedures. NOTE: Use the FreshStart ™ pre-filter when filling or refill 10,000 the spa to remove unwanted contaminants. Prior to each use Add one-quarter (1/4) teaspoon of sodium dichlor -or- (Test before adding any chemicals;...

  • Page 46: Freshwater Ag+ ® Silver Ion System

    ™ ® FRESHWATER SILVER ION SYSTEM The Silver Ion system is comprised of the following products: • FreshStart Pre-filter ™ 10,000 • Sodium Dichlor • Monopersulfate (MPS) • FreshWater Silver Ion Purifier ® Ag + FreshStart Pre-filter is used when filling a spa for the first time or at refill. It attaches to a garden hose and filters out rust, dirt, ™...

  • Page 47: Silver Ion Purifier Replacement

    ™ ® FRESHWATER SILVER ION PURIFIER REPLACEMENT INSTRUCTIONS When replacing the Silver Ion Purifer (every four months), it is highly recommended that the spa be drained and refilled at the same time. After refilling the spa with water, balance the Total Alkalinity (TA), Calcium Hardness (CH) and pH to the recommended levels. Shock the spa by adding sodium dichlor.

  • Page 48: Chlorine (Sodium Dichlor)

    ™ Question: What happens if I do not add the weekly non-chlorine oxidizer treatment? Answer: The contaminants in the water may coat the silver ion cartridge’s ceramic beads, blocking the silver ions’ release into the water. When this occurs, there will be no residual of silver ions present in the water, eliminating them from the sanitizing process. Question: How often should the FreshWater silver ion purifier cartridge be replaced? ®...
  • Page 49 ™ B. Watkins Manufacturing Corporation recommends the use of Sodium Dichlor type granulated chlorine for sanitizing the water. Sodium Dichlor is preferred because it is totally soluble, dissolves quickly and is nearly pH neutral. C. Maintaining the proper level of chlorine during use is extremely important. D.
  • Page 50 NOTE: Well water may contain high concentrations of minerals. The use of a low water volume, extra-fine pore water filter (in-line pre- filter such as the FreshStart ™ pre-filter) will help to remove many of the larger particles during the filling of the spa. In-line pre- 10,000 filters can be purchased at your local Solana ™ Spa Dealer.
  • Page 51 ™ OAM INHIBITORS Spa water requires changing due to the buildup of soap in the water. Typically, soap will cause the spa water to foam when the jets are used. Soap is introduced into the spa water from two sources: users’ bodies, which retain a soap residual after showering, and swimming apparel, which retains soap after washing.

  • Page 52: Common Water Chemistry Questions

    ™ • DON’T broadcast or sprinkle the chemicals onto the water surface. This method may cause chemically-induced spa surface blistering (chemical abuse). • DO add all chemicals slowly into the filter compartment with the jet pump operating on high speed for ten minutes. •...

  • Page 53: Water Terminology

    Answer: While over-exposure to any chemical can be unhealthful, many low levels of chemicals are effective and beneficial. In the case ™ of spa water, the chemicals recommended in the Solana Spa Water Maintenance program are needed to protect the user from water- borne pathogens (disease-causing microbes) and to prevent corrosion of spa components.
  • Page 54 ™ or by water with levels of TA, CH, pH or sanitizer which are outside the recommended ranges. DPD: The preferred reagent used in test kits to measure the Free Available Chlorine. Halogen: Any one of these five elements: fluorine, chlorine, bromine, iodine and astatine. MPS: Monopersulfate is the non-chlorine oxidizer used with the FreshWater Silver Ion Purification system.

  • Page 55: Service Information

    ™ VI. SERVICE INFORMATION GENERAL INFORMATION our Solana ™ Spa has been designed to provide years of trouble-free use. As with any appliance, problems may occasionally occur that require the expertise of a qualified service person. Though such simple repairs as resetting a GFCI switch or breaker, High Limit Thermostat, or Pressure Switch or replacing a light bulb may not require a service call, they may indicate that a more serious condition exists.

  • Page 56: Miscellaneous Service Information

    Spa is equipped with a safety suction spring valve which will break the prime of the jet pump if both suction fittings are obstructed. ACTS INVALIDATING WARRANTY The limited warranty is void if the Solana ™ Spa has been subjected to alteration, misuse or abuse, or if any repairs on the spa are attempted by anyone other than an authorized representative of Watkins Manufacturing Corporation.

  • Page 57: Disclaimers

    *Operation of the spa does not mean “use” of the spa! Watkins Manufacturing Corporation does not recommend using the spa if the water temperature is above or below the spa’s control panel temperature range. DISCLAIMERS Watkins Manufacturing Corporation shall not be liable for loss of use of the Solana ™ Spa or other incidental or consequential costs, expenses or damages, which may include but are not limited to, the removal of a permanent deck or other custom fixture.

  • Page 58: Troubleshooting

    TROUBLESHOOTING Watkins Manufacturing Corporation strives to provide the most trouble-free spas on the market. Should you experience any problem whatsoever, do not hesitate to contact your authorized Solana ™ Spa Dealer. Here are some tips to help you to diagnose and rectify some more common sources of trouble yourself, if you choose to do so.

  • Page 59: Spa Water Maintenance Troubleshooting Guide

    ™ SPA WATER MAINTENANCE TROUBLESHOOTING GUIDE Problem Probable causes Solutions Cloudy Water • Dirty filters • Clean filters • Excessive oils / organic matter • Shock spa with sanitizer • Improper sanitization • Add sanitizer • Suspended particles / organic matter •...
  • Page 60 ™ NOTES:...
  • Page 61 ™ NOTES:...
  • Page 62 ™ (Model XC) ©2000 Watkins Manufacturing Corporation. Hot Spring, Solana, Comfort Control, Cover Shield, Hydro Pulse, Precision, Endurol, No-Fault, FreshStart, FreshWater , Moto-Massage and Serenity Made Simple are trademarks of Watkins Manufacturing Corporation. Baqua Spa is a trademark of AVECIA, Inc. Windex is a trademark of S.C. Johnson & Son, Inc. Soft Scrub is a trademark of The Clorox Company.
  • Page 63 Flashing Water · Push a control panel button to stop the flashing. temperature IMPORTANT: If the water temperature is significantly different than the temperature value shown on the keypad display, contact your authorized Solana Dealer. ADD-38998 (6/01) T:\TECH\OWNERS\Solana\01 Owners\Addendum\Add-38998.doc...
  • Page 64 Owner’s manual under “Important Spa Information” and “Heater and Hydromassage Systems” should be disregarded. · One of the changes made to the Solana was the addition of a new weather resistant base pan. Due to the installation of this base pan, the support braces are no longer visible from beneath the spa as illustrated in the Spa Leveling Instructions.
  • Page 65 ™ ™ OWNER’S MANUAL Watkins Manufacturing Corporation...
  • Page 67 Solana dealer. They are trained professionals who are familiar with the product as well as new ™ spa ownership concerns. Their expertise will facilitate the enjoyment of your new Solana spa. ™ The Serial Number/Identification label is located within the equipment compartment of your Solana spa.
  • Page 68 Important! Important! unsupervised access to a pool (or spa) by children under 5 years of age. Your Solana spa is equipped ™ with a locking cover. As a general practice, your local Building Department will inform you of any applicable barrier requirements at the time a permit is obtained for the installation of an electrical circuit.
  • Page 69 Deck Installation Freshwater Silver Ion Purifier Replacement ® Outdoor Installation Chlorine (Sodium Dichlor) How to Move the Solana ™ Common Water Chemistry Questions How to Remove and Replace the Front Access Panel Water Terminology Spa Leveling Instructions VI. SERVICE INFORMATION...

  • Page 70: Safety Information

    • To reduce the risk of injury, lower water temperatures are recommended for young children. Children are especially sensitive to hot water. • Make sure you always lock the child resistant locks after using the spa for your children’s safety. Every Solana spa is equipped ™...
  • Page 71 ™ VOIDING THE ISK OF LECTROCUTION ANGER ISK OF ELECTROCUTION • Connect only to a grounded source. • Do not bury the power cord. A buried power cord may result in death or serious personal injury due to electrocution if direct burial-type cable is not used, or if improper digging occurs.
  • Page 72 ™ the terminal box that is provided for this purpose if in accordance with National Electrical Code ANSI/NMFPA70-1993. • Do not permit any electrical appliances, such as a light, telephone, radio, or television within 5 feet (1.5 m) of a spa. Failure to maintain a safe distance may result in death or serious personal injury due to electrocution if the appliance should fall into the spa.
  • Page 73 • Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems or diabetes should consult a physician before using spa. NCLEAN WATER • Keep the water clean and sanitized with correct chemical care. The recommended levels for your Solana spa are: ™...
  • Page 74 • Test the water with your hand before entering the spa to be sure it’s comfortable. AFETY Each Solana ™ spa is shipped with a SAFETY SIGN in the owner’s package. The sign, which is required as a condition of Product Listing, should be permanently installed where it is visible to the users of the spa.

  • Page 75: Important Spa Information

    If you have an operational problem, carefully go through the steps outlined in the Troubleshooting section. If you are not able to resolve the problem, contact your authorized Solana Spa Dealer. Many problems can easily be ™...

  • Page 76: Installation Instructions

    Consult your local code authority to determine if an electrical outlet with a cover is required for your installation. If it is, a suitable outlet may be purchased from your Authorized Solana Dealer. Ask for Part #71591.

  • Page 77: Deck Installation

    Plus, a spa surrounded by dirt or grass will soon be filled with dirt or grass from users’ feet; therefore, it is important to get it onto a solid foundation as soon as possible. HOW TO MOVE THE SOLANA ™...

  • Page 78: How To Remove And Replace The Front Access Panel

    ™ HOW TO REMOVE AND REPLACE THE FRONT ACCESS PANEL Your spa uses three panels that are attached to the frame. These panels are referred to as side panels and a front panel. The front panel is located below the control panel. Behind the front panel, you’ll find all the electrical components. The front panel is held onto the frame with six Phillip screws.

  • Page 79: Spa Leveling Instructions

    16" cord exits 3. Carefully lift and pivot the carpenter’s level (so as not to knock over your stack of shims) to the remaining corner. The Solana spa may be shimmed under any of the dimple locations ™ - Dimple locations in Base Pan shown in the bottom view of the spa.

  • Page 80: Electrical Requirements And Precautions

    115 volt 30 amp hard-wired configuration. The 30 amp configuration provides enough electrical current to allow the heater and the high speed jet pump to operate simultaneously. Conversion requires electrical modification within the control box (contact an authorized Solana Service Technician) and the installation of an electrical sub-panel (available from your Solana ™ ™...
  • Page 81 , note #3, on page 13. NSTALLATION OTES If you choose to convert your spa to 115 volt 30 amp operation (contact an authorized Solana Spa Service Technician to perform the ™ conversion), a licensed electrician must install the sub-panel (available from your Solana ™...
  • Page 82 3. Using a pair of needle nose pliers, carefully move the JM1 jumper from pins 2 and 3 to pins 1 and 2 (see Figure 2). A licensed electrician must install the sub-panel (available from your Solana Spa Dealer) to supply ™...
  • Page 83 ™ 30 A MP SUB PANEL WIRING INSTRUCTIONS NOTE: The sub-panel must be placed within 100 feet of the main electrical service panel, and between 5 and 50 feet away from the spa. Refer to the wiring diagram below. 1. Connect the #10 AWG, WHITE [NEUTRAL] wire from the main electrical service panel to the sub-panel NEUTRAL bar. 2.
  • Page 84 If the GFCI breaker fails to operate in this manner, it is an indication of an electrical malfunction and the possibility of an electric shock. Disconnect the power until the fault has been identified and corrected. IMPORTANT: Should you ever find the need to move or relocate your Solana ™...
  • Page 85 ™ SOLANA ™ VERHEAD PECIFICATIONS 8 Precision jets ® Moto-Massage ® Cupholders HORIZONTAL DIMENSIONS: 67” x 67” (170 cm x 170 cm) Armrest HEIGHT (without cover): 29” (74 cm) Spa pillow EFFECTIVE FILTER AREA: 30 sq. ft. (2.7 sq. meters) HEATER: 1000 watts (1.0 kW)

  • Page 86: Equipment Compartment View

    ™ QUIPMENT OMPARTMENT 1. 1.0 kW Heater 2. Spa Drain Valve 3. Electrical Control Box 4. Compression Unions 5. Jet Pump...

  • Page 87: Operating Instructions

    • Do not add chlorine if treating your spa with polyhexamethylene biguanide (Biguanide, PHMB, eg. BaquaSpa™) sanitizer. 1. Close the drain, attach the drain cap and fill the spa with water through the filter compartment. The water level of your Solana ™...
  • Page 88 ™ jet system and remove any remaining air from the heating system, push the JETS button twice to make the jet pump run on high speed for one minute. Once the jet system is fully operational (as indicated by strong, non-surging jets), priming of the spa is complete.

  • Page 89: Heating And Hydromassage Systems

    ™ OPERATION NOTES: 1. The Solana ™ spa is equipped with a 10-minute Tranquil Mode timer delay on the heating/maintenance mode. Whenever the high speed mode of the jet pump has been turned off, it will take 10 minutes before the low speed of the jet pump and heater become activated, unless the JETS button is pushed again.
  • Page 90 20°F, the heater may not be able to raise the spa water to the desired temperature, and the heater and low speed cycle will run continuously, resulting in substantially higher operating costs. IMPORTANT: The 115 volt electrical system of the Solana spa is not convertible to a 230 volt system. Any modification to the original ™...
  • Page 91 Should the Moto-Massage jet not achieve full vertical travel and the problem is ® ® not a closed air control valve, a pump set on low speed, or a clogged filter cartridge, then your Solana Spa Service Center should be ™ contacted.

  • Page 92: Safety Equipment

    ™ ® RECISION Precision Jets are in a group of eight. They are designed to perform a soft, soothing massage on your back and shoulders. Adjust their ® pressure using the Comfort Control lever. ® SAFETY EQUIPMENT A. GFCI: The Ground Fault Circuit Interrupter, located on the end of the power cord, is a safety device that is designed to sense as little as 5 milliamps of electrical current leakage to ground.

  • Page 93: Comfort Control System

    MAX allows for the same volume of air to flow to all ® ® Moto-Massage jets and Precision jets simultaneously. On the Solana ™ , the jet faceplate is then used to control the intensity of the ® ®...
  • Page 94 ™ C. TEMPERATURE CONTROLS: The set temperature range is from 50°F to 104°F (10°C to 40°C). The factory-set temperature of the spa water is 102°F (39°C). Whenever power is disconnected and then reconnected to the spa, the water temperature will automatically seek this temperature, unless you set it otherwise using the temperature controls. Pressing the Temp Plus (+) button displays the spa’s set temperature.

  • Page 95: Spa Care And Maintenance

    3. Open the valve by turning the knob counterclockwise. The spa will drain almost completely by gravitational flow. Any remaining water should be removed using a soft towel. IMPORTANT: All Solana spa models will drain almost completely through the main drain valve. Use a soft towel to remove any ™...

  • Page 96: Filter Maintenance

    IMPORTANT: Always clean the filter cartridge each time the spa is drained for cleaning. Always sanitize and chemically balance the spa water after cleaning and refilling the spa. FILTER MAINTENANCE As with any water filtering system, the filter cartridge may become clogged, resulting in reduced water flow. In your Solana ™ spa, it is important to maintain a clean, unobstructed filtering system to ensure maximum performance from the jets.

  • Page 97: Care Of The Exterior Finish

    This will return the original luster and shine to the marred spa shell surface. SERVICE NOTES: 1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your Solana Spa Dealer about a Stain and ™...
  • Page 98 IMPORTANT: Some surface cleaners contain eye and skin irritants. Keep all cleaners out of the reach of children and use care when applying. IDING The spa siding of the Solana spa is manufactured from Endurol , a durable U.V.-resistant material. Even so, monthly cleaning and ™...
  • Page 99 ™ 2. Rinse off the underside of the cover with water only (do not use soap), and wipe it clean with a dry rag. 3. To condition the cover after cleaning, apply a thin film of Cover Shield to the vinyl surface and buff to a high luster. UTDOOR SPA USE 1.

  • Page 100: Care Of The Spa Pillow

    ™ CARE OF THE SPA PILLOW The spa pillow will provide years of comfort if treated with care. The pillow has been positioned above the water level in order to minimize the bleaching effects of chlorinated water and other spa water chemicals. To extend its life, whenever the spa shell is being cleaned, the spa pillow should be removed and cleaned.

  • Page 101: Prevention Of Freezing

    (or neighbor) is not available to assist with the water maintenance, draining or winterizing of the spa is recommended. PREVENTION OF FREEZING Your Solana spa has been designed and engineered primarily for indoor applications. In areas where the ambient temperature falls ™...
  • Page 102 When replacing, do not overtighten. O REACTIVATE Reinstall the filter cartridge, close the main drain and reinstall the drain cap. Follow the Start-Up and Refill Procedures to make your Solana spa operational. ™...

  • Page 103: Water Quality And Maintenance

    ™ V. WATER QUALITY AND MAINTENANCE t’s important to have clean water. Water maintenance is one of the least understood, yet most important areas of spa ownership. Your dealer can guide you through the process of achieving and maintaining perfect water in your spa, given your local conditions. Your program will depend on your water’s mineral content, how often you use your spa, and how many people use it.
  • Page 104 ™ • pH • Sanitizer Two types of testing methods are recognized and recommended by Watkins: The Reagent Test Kit is a method which provides a high level of accuracy. The reagents come in either liquid or tablet form. Test Strips are a convenient testing method used by many spa owners. Keep in mind that test strips are susceptible to heat and moisture contamination, which will result in inaccurate readings.
  • Page 105 ™ HEMICALS ATER IMPORTANT: All spa water chemicals, including granulated dichlor, MPS, granulated pH increaser or decreaser, granulated total alkalinity increaser, calcium hardness increaser, liquid stain and scale inhibitor, and liquid de-foamer must always be added directly into the filter compartment while the jet pump is running in high speed mode, and it must run for a minimum of ten minutes. O ADMINISTER SPA WATER CHEMICALS 1.

  • Page 106: The Solana ™ Spa Water Maintenance Program

    ™ THE SOLANA SPA WATER MAINTENANCE PROGRAM ™ Each step in your water maintenance program is dependent on the completion of the previous steps. Omitting a step or failing to reach the recommended range may cause an imbalance in your water’s chemistry. Unbalanced water chemistry can damage the spa and its components as well as cause discomfort for the user.
  • Page 107 ™ (CH) ALANCING THE ALCIUM ARDNESS A. The recommended Calcium Hardness (CH) level for your spa is 150-200 ppm. B. Calcium Hardness is a measure of the total amount of dissolved calcium in the water. Calcium helps control the corrosive nature of the spa’s water.
  • Page 108 ™ ™ THE SOLANA SPA WATER MAINTENANCE QUICK REFERENCE GUIDE Ideal Range (ppm) What Chemicals to Use Steps Minimum Maximum To Raise To Lower 1 Total Alkalinity Sodium Hydrogen Sodium Bisulfate Carbonate or Sodium Bicarbonate 2 Calcium Hardness 150 Calcium Hardness...
  • Page 109 ™ • The water may become irritating to spa users. • The spa’s equipment may corrode. If the pH is too low, it can be increased by adding sodium hydrogen carbonate to the spa water. D. If the pH level is too high, the following may result: •...

  • Page 110: Solana ™ Water Treatment Guide

    ™ ™ SOLANA WATER TREATMENT GUIDE At spa startup Follow spa Start-Up and Refill Procedures. NOTE: Use the FreshStart ™ pre-filter when filling or refill 10,000 the spa to remove unwanted contaminants. Prior to each use Add one-quarter (1/4) teaspoon of sodium dichlor -or- (Test before adding any chemicals;...

  • Page 111: Freshwater

    ™ FRESHWATER SILVER ION SYSTEM ® The Silver Ion system is comprised of the following products: • FreshStart Pre-filter ™ 10,000 • Sodium Dichlor • Monopersulfate (MPS) • FreshWater Silver Ion Purifier ® Ag + FreshStart Pre-filter is used when filling a spa for the first time or at refill. It attaches to a garden hose and filters out rust, dirt, ™...

  • Page 112: Freshwater

    ™ FRESHWATER SILVER ION PURIFIER REPLACEMENT ® INSTRUCTIONS When replacing the Silver Ion Purifer (every four months), it is highly recommended that the spa be drained and refilled at the same time. After refilling the spa with water, balance the Total Alkalinity (TA), Calcium Hardness (CH) and pH to the recommended levels. Shock the spa by adding sodium dichlor.

  • Page 113: Chlorine (Sodium Dichlor)

    ™ Question: What happens if I do not add the weekly non-chlorine oxidizer treatment? Answer: The contaminants in the water may coat the silver ion cartridge’s ceramic beads, blocking the silver ions’ release into the water. When this occurs, there will be no residual of silver ions present in the water, eliminating them from the sanitizing process. Question: How often should the FreshWater silver ion purifier cartridge be replaced? ®...
  • Page 114 ™ B. Watkins Manufacturing Corporation recommends the use of Sodium Dichlor type granulated chlorine for sanitizing the water. Sodium Dichlor is preferred because it is totally soluble, dissolves quickly and is nearly pH neutral. C. Maintaining the proper level of chlorine during use is extremely important. D.
  • Page 115 NOTE: Well water may contain high concentrations of minerals. The use of a low water volume, extra-fine pore water filter (in-line pre- filter such as the FreshStart pre-filter) will help to remove many of the larger particles during the filling of the spa. In-line pre- ™ 10,000 filters can be purchased at your local Solana Spa Dealer. ™...
  • Page 116 ™ OAM INHIBITORS Spa water requires changing due to the buildup of soap in the water. Typically, soap will cause the spa water to foam when the jets are used. Soap is introduced into the spa water from two sources: users’ bodies, which retain a soap residual after showering, and swimming apparel, which retains soap after washing.

  • Page 117: Common Water Chemistry Questions

    ™ • DON’T broadcast or sprinkle the chemicals onto the water surface. This method may cause chemically-induced spa surface blistering (chemical abuse). • DO add all chemicals slowly into the filter compartment with the jet pump operating on high speed for ten minutes. •...

  • Page 118: Water Terminology

    Answer: While over-exposure to any chemical can be unhealthful, many low levels of chemicals are effective and beneficial. In the case of spa water, the chemicals recommended in the Solana Spa Water Maintenance program are needed to protect the user from water- ™...
  • Page 119 ™ DPD: The preferred reagent used in test kits to measure the Free Available Chlorine. Halogen: Any one of these five elements: fluorine, chlorine, bromine, iodine and astatine. MPS: Monopersulfate is the non-chlorine oxidizer used with the FreshWater Silver Ion Purification system. ®...

  • Page 120: Service Information

    ™ VI. SERVICE INFORMATION GENERAL INFORMATION our Solana Spa has been designed to provide years of trouble-free use. As with any appliance, problems may occasionally occur ™ that require the expertise of a qualified service person. Though such simple repairs as resetting a GFCI switch or breaker, High Limit Thermostat, or Pressure Switch or replacing a light bulb may not require a service call, they may indicate that a more serious condition exists.

  • Page 121: Miscellaneous Service Information

    ™ are obstructed. ACTS INVALIDATING WARRANTY The limited warranty is void if the Solana ™ Spa has been subjected to alteration, misuse or abuse, or if any repairs on the spa are attempted by anyone other than an authorized representative of Watkins Manufacturing Corporation. Alteration is defined as any component or plumbing change, electrical conversion, or the addition of any non-approved sanitation or water purification device or heating system which contributes to a component failure, unit failure or unsafe operating condition.

  • Page 122: Disclaimers

    *Operation of the spa does not mean “use” of the spa! Watkins Manufacturing Corporation does not recommend using the spa if the water temperature is above or below the spa’s control panel temperature range. DISCLAIMERS Watkins Manufacturing Corporation shall not be liable for loss of use of the Solana Spa or other incidental or consequential costs, ™...

  • Page 123: Troubleshooting

    TROUBLESHOOTING Watkins Manufacturing Corporation strives to provide the most trouble-free spas on the market. Should you experience any problem whatsoever, do not hesitate to contact your authorized Solana Spa Dealer. Here are some tips to help you to diagnose and ™...
  • Page 124 ™ SPA WATER MAINTENANCE TROUBLESHOOTING GUIDE Problem Probable causes Solutions Cloudy Water • Dirty filters • Clean filters • Excessive oils / organic matter • Shock spa with sanitizer • Improper sanitization • Add sanitizer • Suspended particles / organic matter •...
  • Page 125 ™ NOTES:...
  • Page 126 ™ NOTES:...
  • Page 127 ™ (Model XC) ©2002 Watkins Manufacturing Corporation. Hot Spring, Solana, Comfort Control, Cover Shield, Hydro Pulse, Precision, Endurol, No-Fault, FreshStart, FreshWater , Moto-Massage and Serenity Made Simple are trademarks of Watkins Manufacturing Corporation. Baqua Spa is a trademark of AVECIA, Inc. Windex is a trademark of S.C. Johnson & Son, Inc. Soft Scrub is a trademark of The Clorox Company.

This manual is also suitable for:

Draft 12Draft 00

Table of Contents