Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for T-ROBOT T-Robot-S
- Page 1 T-ROBOT Operation Manual June 2011 Shanghai New Century Robot Co., Ltd. Add: 16F, Yindong Building, 58 Xinjinqiao Road, Pudong New Area, Shanghai 201206 Tel: +86 (021) 61086568 Fax: 021-61086567 Website: http://www.x-robot.com.cn...
- Page 2 Notes When you enjoy the funs of riding T-ROBOT, you may also face the risk of accident injury caused by unbalance, collision and toppling. For your and others’ safety, please ensure T-ROBOT is in good service condition and carefully read and understand all user materials provided by our company before riding.
-
Page 3: Table Of Contents
1.2. Risk of Injury ..............................1 1.3. User Materials ..............................1 1.4. Put Safety First ..............................1 About T-ROBOT................................. 2 2.1. Characteristics of T-ROBOT ..........................2 2.2. Operating Principle ............................. 2 2.3. Main Technical Parameters ..........................3 2.4. Operation Limit ..............................4 2.5. - Page 4 8.2. Pushing/pulling T-ROBOT ..........................23 8.3. Maintenance of tire ............................24 8.4. Cleaning T-ROBOT ............................24 8.5. Storage and transportation of T-ROBOT ......................24 8.6. Liquid crystal display and description ......................24 Safety precautions ..............................26 10. Follow-up service ..............................29 10.1.
-
Page 5: Introduction
When you enjoy the funs of riding T-ROBOT, you also risk the accident injury by unbalance, collision and toppling. For your and others’ safety, please ensure the T-ROBOT is in good service condition and carefully read and understand all user materials provided by our company before riding. -
Page 6: About T-Robot
T-ROBOT will generate a forward moment so that the moment leading to forward overturn of person and car can be balanced on one hand and the speed for moving T-ROBOT forwards can be produced on the other hand. -
Page 7: Main Technical Parameters
Fig. 1 Operating Principles of T-ROBOT 2.3. Main Technical Parameters Table 1 Main Technical Parameters Specification T-Robot-O International T-Robot-S T-Robot-W Police Version version Photos Size Dimensions(L*W*H) 800mmX703mmX1258mm/ 800mmX840mmX1298mm/ 800mmX700mmX1200mm/ 31.5in*27.7in*49.5in 31.5in*33in*51in 31.5in*27.6in*47.2in Ground Clearance (no 100mm /3.9in 120mm /4.7in 120mm /4.7in... -
Page 8: Operation Limit
Battery: the proper storage, charging and maintenance increase the distance, while such improper behaviors will reduce the distance. 2.4. Operation Limit It is important for you to understand the operation limits of T-ROBOT. Your following of these limits can reduce the risks when you are riding T-ROBOT. 2.5. Weight Limit... - Page 9 5 Kg and 3 Kg respectively, and the goods loaded in both accessory cases must be evenly distributed and fixed to prevent the moving of goods loaded in both accessory cases during the fast running of vehicle; Maximum weight limit: T-ROBOT has passed the strict mechanical analysis and detection and exceeding the maximum load will damage your T-ROBOT.
-
Page 10: Components Of T-Robot
3.3. Function of Auxiliary brake button The auxiliary brake button allows you to realize deceleration or auxiliary brake during normal running of T-ROBOT. Note: Be cautious about using the auxiliary brake button under a low speed. -
Page 11: Fingerprint Scanner (Optional)
Before startup, please turn the knob switches on both sides to the neutral position. The left and right knob switches can’t be turned over 360°. Don’t operate it roughly. 3.6. Shutdown button The shutdown button and wireless shutdown button are mainly used to shut down T-ROBOT for energy saving after riding. -
Page 12: Illuminating Lamp
2 seconds or wireless shutdown button so that the vehicle shuts down. 2) When T-ROBOT is running at a speed higher than 3 km/h, both the shutdown button and the auxiliary brake button should be pressed simultaneously for final shutdown. -
Page 13: Width Lamps And Brake Lamp
The width lamps are mostly used for the indication in the relatively dark ambient light. The brake lamp is mostly used for the indication of braking. 1) When the illuminating lamp of T-ROBOT is turned on, the brake lamp will automatically flash. 2) When T-ROBOT brakes, the brake lamp will be automatically lit. -
Page 14: Battery
3.17. Battery T-ROBOT adopts two high-energy-density and durable Li-Ion batteries. Please refer to the battery instructions for more information. 4. Wireless key The wireless key is mostly used for wireless startup safety certification or wireless shutdown. To improve the safety, the shutdown button on the wireless key only functions in the system setup mode. -
Page 15: Installation Guide
5.1. Installation of battery T-ROBOT adopts two durable Li-Ion batteries. The running distance before recharging reaches up to 30 km (it will be different depending on land form, riding style and load). In addition, the batteries require a low maintenance cost and provide a long service life. -
Page 16: Mounting Of Triangle
After installation of triangle, check if there is any shaking of the triangle and ensure it is installed in position. 5.3. Dismounting of triangle Under the shutdown state, park the T-ROBOT steadily on a flat ground; reach the central part of rear bumper by hand and pull the quick-dismantling spring. - Page 17 Fig. 6 Dismounting of triangle Note: The spring at the back of quick-dismantling mechanism must be pulled to the end. The triangle must be slid backwards along the base surface. The triangle cannot be shaken after it is slid out so as to avoid damage to the plastic interfaces on the central part at the lower end and center of the base of triangle.
-
Page 18: Safe Riding
For your safety, please carefully read and remember the following warnings: When you enjoy the funs of riding T-ROBOT, you may also face the risk of accident injury caused by unbalance, collision and toppling. For your and others’ safety, please ensure the T-ROBOT is in good service condition and carefully read and understand all user materials provided by our company before riding. -
Page 19: Check The Tire
6.7. Safety warning 6.7.1. Speed limit 1. T-ROBOT should be running at a maximum speed of 20 Km/h. T-ROBOT will automatically raise its head and give a warning in case of speeding. 2. In order to avoid side rollover, it is not suggested to turn rapidly at a high speed. -
Page 20: Avoid Risks
Under the above conditions, get off and shut down the vehicle and then push or pull T-ROBOT to a safe area for re-start. - Page 21 The trainer shall stand right in front of the vehicle and hold the left and right handles with both hands to maintain stability of T-ROBOT. The rider shall get on the vehicle from its rear side with no excessive action to prevent fore-and-aft sliding of wheels.
-
Page 22: Riding Exercise
In this way, the vehicle will move forwards; contrarily it will move backwards, as shown in Fig. 14. Fig. 14 Move forwards/backwards 2. Grip the handle by both hands. Turn it left and T-ROBOT will turn left. Turn it right and T-ROBOT will turn right, as shown in Fig. 15. - Page 23 For a steering, always turn the direction after slowing down. During turning, the body’s gravity center should lean slightly according to the turning direction so as to keep T-ROBOT stable. Speeding or prolonged reversing is strictly forbidden. Failing to follow this could cause serious casualty accidents.
-
Page 24: Battery Instructions
Open the charging port of T-ROBOT. Check that the charging port and charger plug of T-ROBOT and the AC power outlet are in a clean and dry condition. Plug the charger plug into the AC power outlet which has been correctly connected. -
Page 25: Charging Indicator
7.3.6. Battery power display The power status of T-ROBOT is displayed with two bars on both sides, as shown in Fig. 16. You can estimate the remaining running distance and charge in time according to the power display. -
Page 26: Influence Of Temperature On Battery Performance
For your safe riding, T-ROBOT can operate in a low battery voltage mode, as shown in Fig. 17. Once an animation of low battery voltage mode appears, you must get off the vehicle and push or pull T-ROBOT to a safe area. Complete re-charging as per the procedure in this manual for the next riding. -
Page 27: Operation And Maintenance
Fig. 18 Handling T-ROBOT 8.2. Pushing/pulling T-ROBOT When pushing T-ROBOT, the person should stand behind the vehicle with one hand holding the handle and another pressing down the seat. Thus the head of T-ROBOT will be slightly lifted. Slowly move T-ROBOT forward. -
Page 28: Maintenance Of Tire
8.5. Storage and transportation of T-ROBOT 1. T-ROBOT should be stored in a dry, damp proof, anticorrosive, smear-free, high-temperature resistance and ventilating condition. It should be covered with a cloth covering when it is not used to protect the overall appearance. - Page 29 System setup mode As per operation guide Balance mode Safe riding Fingerprint Registered Register Fingerprint Input Input Fingerprint input error Re-input Failure Inspection and maintenance...
-
Page 30: Safety Precautions
Avoid running on an obstructed, bumpy, sludgy, slippery, soft or stony road surface, steep gradient or a stairway to prevent risks. You can get off and shut down the vehicle and then push or pull T-ROBOT to a safe area for re-start. - Page 31 22. Avoid distraction. Don’t talk to the phone or listen to music during riding. Please concentrate your attention. 23. During the riding of T-ROBOT, don’t reverse rapidly or turn backwards. 24. Never restart if it indicates the low battery voltage mode. You must get off to push or pull T-ROBOT to a safe area.
- Page 32 46. Don’t ride T-ROBOT amid dangerous gases so as to avoid fire or other problems. 47. T-ROBOT should avoid being exposed to sunlight for prolonged time. Store it in a cool place. The direct sunlight can accelerate degradation of the paint, plastics, rubber parts and electronic components, reducing their service life and reliability.
-
Page 33: Follow-Up Service
10. Follow-up service 10.1. Replacement of parts For replacement of parts, please go to the authorized service center of Shanghai New Century Robot Co., Ltd. Never assemble/disassemble it on your own. 10.2. Purchase of other accessories All the service centers authorized by Shanghai New Century Robot Co., Ltd can provide services for you with respect to accessories. -
Page 34: Common Failures And Troubleshooting
After the shut down by slave Shutdown button cannot shutdown button, you should immediately Failure occurs to main vehicle deliver the T-ROBOT to the authorized or shut down the vehicle designated service center of Shanghai New Century Robot Co., Ltd for inspection and maintenance. - Page 35 Shake or eccentricity of Front/rear quick-dismantling mechanism is Contact the designated service center for triangle loose or deformed replacement of triangle Tire is loose or shaking Lock bolts get loose Tighten the bolts Tire turns to one side Shut down the vehicle for inspection; suddenly when it is in Signal failure contact the designated service center...
Need help?
Do you have a question about the T-Robot-S and is the answer not in the manual?
Questions and answers