Advertisement
Quick Links
Please Contact Moen First
For Installation Help, Missing or
Replacement Parts
(USA)
1-800-BUY-MOEN (1-800-289-6636)
Mon - Fri 8:00 AM to 8:00 PM, Eastern
Sat. 9:00 AM to 5:30 PM Eastern
WWW.MOEN.COM
(Canada)
1-800-465-6130
Mon - Fri 7:30 AM to 7:00 PM, Eastern
WWW.MOEN.CA
Por favor, contáctese primero con Moen
Para obtener ayuda de instalación, piezas
faltantes o de recambio
01-800-718-4345
Lunes a viernes de 8:00 a 20:00 hs.
(Costa Este)
Sáb. 8:00 a 18:30 hs. (Costa Este)
WWW.MOEN.MX
Veuillez d'abord contacter Moen
en cas de problèmes avec l'installation, ou pour
obtenir toute pièce manquante ou de rechange
1-800-465-6130
Du lundi au vendredi:
de 7 h 30 à 19 h, HE
WWW.MOEN.CA
HELPFUL TOOLS
For safety and ease of faucet replacement,
Moen recommends the use of these
helpful tools.
Installation Guide
Guía de Instalación
Guide d'installation
MEZCLADORA MONOMANDO PARA COCINA
ROBINET DE CUISINE À UNE POIGNÉE
Su mezcladora puede no tener el mismo aspecto que la imagen que precede
HERRAMIENTAS ÚTILES
Para que el cambio de la llave sea fácil y
seguro, Moen le recomienda usar estas
útiles herramientas.
ONE-HANDLE KITCHEN FAUCET
Your faucet may not look the same as the image above.
Votre robinet peut être différent de l'image ci-dessus.
OUTILS UTILES
Par mesure de sécurité et pour faciliter
l'installation, Moen suggère l'utilisation des
outils suivants.
INS2217- 8/13
Advertisement
Related Manuals for Moen INS2217
Summary of Contents for Moen INS2217
- Page 1 WWW.MOEN.COM (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.CA Por favor, contáctese primero con Moen Para obtener ayuda de instalación, piezas faltantes o de recambio 01-800-718-4345 Lunes a viernes de 8:00 a 20:00 hs. (Costa Este) Sáb.
-
Page 2: Parts List
Parts List A. Side Spray I. Mounting Nut Product Identi cation B. Faucet Body J. Mounting Nut Screws (x3) Label C. Hose Guide K. Spout Base D. Hose Guide Gasket L. Spout Base Gasket E. Mounting Nut M. Aerator Tool (Select Models) F. - Page 3 INS2217 - 8/13 Option/Opción/Option Option/Opción/Option Faucet Installation Options For Deck Plate Installation, shown top, proceed to step A1. For Deck Ring Installation, shown bottom, proceed to step B1. Opciones de instalación de la mezcladora Para la instalación con placa de cubierta que se muestra arriba, vaya al paso A1.
- Page 4 Place Faucet Body (B) into Spout Base (K) and Deck Plate (F). Proceed to step 3. Deck Ring Faucet Installation Coloque el cuerpo de la mezcladora (B) dentro de la base del surtidor (K) y la placa de Place Spout Base Gasket (L) into Spout Base (K) and place onto mounting surface as shown. cubierta (F).
- Page 5 INS2217 - 8/13 1. From underneath the sink, slide Washer (H) and Mounting Nut (I) over the hoses. Tighten Mounting Screws (J) evenly until faucet assembly is tight. If faucet is provided with 2. Thread Mounting Nut onto Faucet Body (B) until nut is within 1/2 inch of mounting surface.
- Page 6 Thin deck / Plateforme mince / Cubierta na Thick deck / Plateforme èpaisse / Cubierta gruesa Sink Mounted Hose Guide Side Spray Installation Options 1. Place Hose Guide Gasket (D) onto Hose Guide (C). Place into mounting surface hole. For sink mounted Side Spray, shown top, proceed to step A7 2.
- Page 7 INS2217 - 8/13 Go to Step Vaya al paso Aller à l'étape Deck Plate Mounted Hose Guide Insert the hose of the Side Spray (A) into the Hose Guide (C) until Side Spray is seated in 1. Insert Hose Guide (C) into opening on the Deck Plate (F).
- Page 8 Product Identi cation Label Cold Frio Froid Caliente Chaud Place product ID label here. Coloque la etiqueta de identi cación del producto aquí. Placer l’ é tiquette d’identi cation du produit ici. 1. Attach flexible lines to shutoff valves. Turn hot and cold shutoff valves to the on position. Check for leaks. Attach Product 2.
- Page 9 INS2217 - 8/13 Replace the Aerator (O) and tighten by hand. Finished Installation. Vuelva a colocar el aireador (O) y apriete a mano. Instalación terminada. Installation terminée. Replacer l’aérateur (O) et serrer à la main.
- Page 11 INS2217 - 8/13...
- Page 12 Les produits Moen sont fabriqués selon les normes Moen products have been manufactured under the estrictas normas de calidad y mano de obra. Moen le les plus élevées de qualité et de main-d’oeuvre. highest standards of quality and workmanship. Moen garantiza al comprador original que durante el tiempo Moen garantit à...
Need help?
Do you have a question about the INS2217 and is the answer not in the manual?
Questions and answers