Table of Contents
Advertisement
RS-232 Interface
OSCAR provides an RS-232 interface to monitor ist activities and to upload new firmware.
The RS-232 can be connected to a PC. The following pins of the 9 pin Sub-D connector on
OSCARs rear panel should be connected:
OSCAR-Pin
PC-Pin
2
2
3
3
4
5
You can monitor the operation of OSCAR via a terminal program. The correct settings are:
Baudrate: 115 kbit/s
8 bit
1 Stopbit
no parity
We plan to implement some control features via RS-232 in the future. Please refer to the
OSCAR website for further informations.
There is no possibility to load MP3 files via the interface on OSCAR.
BayCom OSCAR-MP3
18
Advertisement
Table of Contents
