Sony ICD-BX132 Quick Start Manual

IC Recorder

Quick Start Guide

ICD-BX132
4-448-097-11(1)
© 2013 Sony Corporation Printed in China
Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
Check the supplied items.
IC Recorder (1)
Quick Start Guide
Parts and controls
Built-in microphone
(headphone) jack
Operation indicator
Display window
FOLDER button
MENU button
PLAY/ENTER button (*)
(review/fast backward) button
(stop) button
(microphone) jack (PLUG IN POWER) (*)
* These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal.
GB
ES
LR03 (size AAA) alkaline batteries (2)
VOL (volume) –/+ button (*)
DIVIDE button
ERASE button
REC/PAUSE (record/pause) button
(cue/fast forward) button
Speaker
Battery compartment
Strap hole (A strap is not supplied.)
Let's try out your new IC recorder
1. Power on.
Slide and lift the battery compartment lid, then insert
batteries with the correct polarity.
Turn the power on.
"POWER ON/OFF" until the window display appears.
OFF switch in the direction of "POWER ON/OFF" until "OFF" is
displayed.
To prevent unintentional operations (HOLD)

2. Set the date and time.

When you insert batteries, "SET DATE" appears on the display, and
then the year section begins to flash.
Press
year), and then press
to set month, day, hour, and minute in sequence.
3. Record.
Press REC/PAUSE.
Recording starts and the operation indicator lights in red.
Operation
You can pause recording by pressing
indicator
PAUSE again to restart recording.
Place the IC recorder so that the built-in microphone face the
direction of the source to be recorded.
Press (stop) to stop recording.
"ACCESS" appears and the recording stops.
4. Listen.
Press PLAY/ENTER.
Operation
Playback starts and the operation indicator lights in green.
indicator
Adjust the volume by pressing VOL –/+.
Press (stop) to stop playback.
5. Erase.
When the IC recorder is in the stop mode, press and hold
ERASE.
When the IC recorder is in the playback mode, press ERASE.
"ERASE" is displayed.
Press ERASE.
or to set the year (the last two digits of the
PLAY/ENTER. Repeat this procedure
REC/PAUSE. Press REC/