Menu Settings; Alerts - Blackspot Interactive Road Angel User Manual

Menu Settings

The following sections list all the editable properties in each of the menu
categories.

Alerts

Settings in the Alerts menu determine how ROAD ANGEL warns you about
road hazards.
No Property
1-0 Voice Alert
Camera Alert
1-1
volume
Camera alert
1-2
single beep
Safety Alert
1-3
Volume
Safety Alert
1-4
single beep
Blackspot
1-5
alert
School zone
1-6
alert
Congestion
1-7
zone alert
Overspeed
1-8
alert
Laser alert
1-9
volume
1-10 Laser Alert
Slow speed
1-11
automute
Speed
1-12
sensitive
volume
20
Details
Switch voice alerts on or off.
Change the sound level of safety camera
related warnings.
Switch alert on or off, as each proximity
bar counts up it will emit a single beep.
Change the sound level for Blackspot,
School and Congestion related warnings.
Switch alert on or off, as each proximity
bar counts up it will emit a single beep.
Switch Blackspot alerts on or off.
Switch School alerts on or off.
Switch Congestion zone entry warnings
on or off.
Set a speed at which the unit will warn if
you exceed the speed.
Changes the volume for laser detection
warnings: 0%-100% in 20% increments.
Turns on or off the internal laser
detection. Sensors plugged into auxiliary
socket will still warn.
When travelling less than 15MPH the unit
will not give an audible warning. If you
enter a zone below 15MPH you will hear
a single beep, followed by the proximity
count up.
Adjust the warning volumes depending
on how fast the vehicle is travelling.
Options
(factory setting in bold)
Off...On
0..20...40...60...80...100%
Off...On
0..20...40...60...80...100%
Off...On
Off...On
Off...On
Off...On
Off...25 - 165
0..20...40...60...80...100%
Off...On
Off...On
Off...On